Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 mm magnetic-levitation case fan runs at 7000 rpm, delivers 18.6 cfm at 40 dB and draws 1.74 W from a 2-pin 12 V header
This 50 x 50 x 15 mm axial fan fits small-form-factor cases and tight clearance spots where larger fans cannot mount. It draws 0.145 A at 12 V for 1.74 W of power and spins at 7000 rpm to move 18.6 cfm of air. The two-pin connector provides simple voltage-controlled operation.
The 2-pin DC connector means speed varies only with supply voltage between 12 V and 7 V; there is no PWM signal for precise duty-cycle control. At full voltage the fan produces 40 dB of noise and 0.26 inch-H₂O of static pressure. Builders who need quieter low-speed operation or motherboard fan-curve management will not get those features from this interface.
Verify that your chassis has 50 mm mounting holes with 15 mm depth clearance for the frame. Confirm the motherboard or fan controller offers a 12 V two-pin header; a four-pin PWM header will run the fan at fixed maximum speed without speed reporting. The magnetic levitation bearing and PBT frame are rated for continuous operation within the stated voltage range.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Power | |
| Power input connector | 2 Pin |
This fan uses a 2-pin connector, so it runs at full 7000 rpm whenever the 12 V rail is powered; there is no PWM or voltage-control wire to vary the speed automatically.
At 7000 rpm the fan moves 18.6 CFM with 0.26 inch-H₂O static pressure, enough for spot-cooling small enclosures or tight component clearances but not for high-restriction radiators.
The 2-pin design only accepts a steady DC voltage; reducing the supply toward 7 V will lower the speed and noise, but the motherboard cannot send PWM signals or read a tachometer signal.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?