Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 mm case fan running on 5 V with double ball bearings and a 2-pin connector, rated for 5 to 10 dBA and 80,000 hours at 25 °C
The SXDOOL SXD5010S05M is a 50 by 50 by 10 mm axial fan that runs on 5 V and draws 0.12 A through a two-pin connector. It targets compact enclosures, small-form-factor PCs and embedded boards where a thin, low-voltage cooler is required.
At 5 V the fan spins at high speed while producing only 5 to 10 dBA, so it suits noise-sensitive builds that need steady airflow across tight component stacks. The operating range spans -10 °C to +70 °C, and the power tolerance of ±15 % means output stays consistent even if the rail fluctuates. It is not suited for high-wattage heat loads that demand larger blade areas or higher static pressure.
The frame and blades are moulded from PBT with 30 % glass fibre and a VO flame-retardant rating, giving structural rigidity in a 10 mm profile. Double ball bearings are rated for 80 000 hours at 25 °C ambient, and insulation resistance exceeds 500 megohms. Counter-clockwise rotation and the two-pin lead imply fixed-speed operation without PWM control, so the installer must provide a steady 5 V source or an external speed controller.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Power | |
|---|---|
| Power input connector | 2 Pin |
| Size & build | |
| Fan size | 50 mm |
| Environment & compliance | |
| Operating noise | 5–10 dBA |
The fan measures 50 by 50 by 10 millimetres and uses a 2-pin connector designed for 5 volt headers, so it matches legacy 5V fan sockets.
At 5 volts and 0.12 amps the fan spins counter-clockwise; listen for a smooth, low hum in the 5 to 10 dBA range — any grinding indicates a bearing issue.
Only the fan unit is supplied; the PBT glass-fibre frame has standard mounting holes, so you will need four 50mm fan screws separately.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?