SXDOOL T&T 4008M12B NF1 12V .14A 40mm 3-pin vga cooling
40 mm 12 V 0.14 A three-pin graphics-card fan, 40×40 mm frame in 9 mm or 10 mm depth
- Direct 12 V power for stable operation
- Low 0.14 A draw keeps system load light
- 40 mm square frame fits tight GPU spaces
- Dual 9 mm or 10 mm thickness options
- Three-pin connector enables speed monitoring
Replacement VGA fan for T&T 4008M12B NF1
This 40 mm 3-pin fan is built as a direct replacement for the T&T 4008M12B NF1 cooler used on graphics cards. It runs on 12 V at .14 A and fits the standard 40 mm square footprint. The unit is supplied new and ready to install.
3-pin connector and dual height profile
The 3-wire 3-pin connector provides power and tachometer feedback to the graphics card header. Two frame thicknesses are offered, 10 mm and 9 mm, so the same model covers both common mounting depths. No extra cables or adapters are included in the package.
40 mm square frame with 3-pin header
The critical fitment detail is the 40 mm by 40 mm frame combined with a 3-pin header; if your card uses a different screw pattern, connector pin-out or voltage, this fan will not mount or report speed correctly. Builders needing a 2-pin or 4-pin PWM connector, or a larger frame size, should look elsewhere.
How it compares
Measured against everything we stock in GPU Fans & Heatsinks, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 85% of the 143 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 3-pin connector on this 40 mm fan support speed reporting so I know when to replace it?
The 3-wire 3-pin interface provides a tachometer signal, letting monitoring software track RPM and warn you when the bearing wears out.
What thermal limit stops this 12 V .14 A cooler from running indefinitely at full load?
The motor is rated for 12 V and 0.14 A; sustained operation at that draw will hit the bearing’s temperature ceiling before any electrical limit.
How loud and hot does the T&T 4008M12B NF1 get when it spins all day in a graphics card?
At 12 V and 0.14 A the fan produces a low whisper-level noise and only slight warmth, typical for a 40 mm frame in constant use.
More in GPU Fans & Heatsinks
Similar items
Thermaltake CL-W183-CU00TR-A Pacific V-GTX 1080Ti Founders Edition Transparent vga cooling
- NIVDIA Geforce GTX…
- Dimension: 22.6 × 1…
Thermaltake CL-W184-CU00TR-A Pacific V-GTX 1080Ti Transparent ASUS ROG vga cooling
- ASUS ROG STRIX GTX1…
- Dimension: 19.4 × 1…





