SXDOOL VGA Cooler for Inno3D GTX960 1070 Gaming Extreme 4 Heat Pipes 58mm
Replacement cooler with four heat pipes, nickel-plated copper base and 90 mm fan fits Inno3D cards using 58 mm hole spacing
- Direct-fit cooling for Inno3D GTX960 and GTX1070 Gaming Extreme
- Four heat pipes with nickel-plated copper base draw heat from GPU
- 90mm fan at 12V plugs into graphics card 4-pin header
- Radiator measures 204 by 97.6 by 36mm for case clearance
- Mounting holes spaced 58mm match board layout exactly
Direct GPU Replacement Cooler
This cooler is built as a drop-in replacement for the Inno3D GTX960 and GTX1070 Gaming Extreme Edition graphics cards. It uses a nickel-plated copper base with four heat pipes and an aluminium fin stack to draw heat away from the GPU core. A single 90mm fan spins at 12V over a standard graphics card 4-pin interface to move air through the heatsink.
Strict Compatibility Requirements
The radiator mounting pattern is fixed at four holes spaced 58mm apart and the overall radiator measures 204 by 97.6 by 36mm. Buyers must verify their PCB matches these exact hole positions and that the fan header sits in the same location shown in the reference illustration. The design will not fit cards with different mounting layouts or connector placements.
Build Integration Notes
The assembly requires 13cm of clearance from the I/O bracket to the end of the gold fingers and the radiator holes must sit at least 14cm from the bracket edge. The 90mm by 15mm fan profile keeps the slot height compact for tighter cases. No additional power adapters are needed beyond the onboard 4-pin header.
How it compares
Measured against everything we stock in GPU Fans & Heatsinks, at today’s prices. Recalculated every night.
- Price $54.99
- Pricier than about 87% of the 143 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
My Inno3D 960 or 1070 Gaming Extreme Edition has four mounting holes spaced 58 mm apart — will this cooler line up?
Yes. The radiator uses the same 58 mm four-hole pattern, so it matches the board when the hole distance is identical.
My Inno3D 960 or 1070 Gaming Extreme Edition has a four-pin fan header on the PCB — will the included 90 mm fan plug in directly?
The cooler ships with a 90 mm × 15 mm fan wired for a graphics-card 4-pin connector, so it plugs straight into the matching header on the board.
After fitting the cooler, how can I confirm the 12 V fan is running at the correct speed?
With the card powered, check the fan RPM in your monitoring software or BIOS; a steady reading shows the 12 V supply and 4-pin control are working.
More in GPU Fans & Heatsinks
Similar items
Thermaltake CL-W184-CU00TR-A Pacific V-GTX 1080Ti Transparent ASUS ROG vga cooling
- ASUS ROG STRIX GTX1…
- Dimension: 19.4 × 1…
Thermaltake CL-W183-CU00TR-A Pacific V-GTX 1080Ti Founders Edition Transparent vga cooling
- NIVDIA Geforce GTX…
- Dimension: 22.6 × 1…
Thermaltake CL-W254-CU00SW-A Pacific V-RTX 2070 Plus ASUS ROG vga cooling
- USB 2.0 connectors…
- Copper + Acrylic
SXDOOL VGA Cooling for Colorful P106-100 GTX1060 960 950 Netchi Edition
- Black





