BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Ten spools of 2.85 mm natural Nylon 230 filament print at 228–235 °C on unheated beds with 4980 PSI tensile strength and 417 % elongation
This pack contains ten spools of Taulman 3D Nylon 230 filament in natural colour. Each spool weighs 1 lb and uses a 5-inch diameter. The material is a standard Nylon 6 formulation developed for printers with cold print beds and lower temperature capabilities. No chemical additives are included in the filament.
Makers who need a nylon that prints between 228 °C and 235 °C on an ambient bed will find this filament appropriate. Typical applications include light-load gears, fan blades, housings, phone covers, protective enclosures and cosmetic containers. Builders whose printers require a heated bed above ambient temperature or who need a different filament diameter should look at other materials.
The filament size is 2.85 mm, which determines whether it matches the printer’s extruder and Bowden system. Printing temperature ranges from 228 °C to 235 °C with a bed temperature at ambient. Tensile strength is 4980 PSI and elongation at break is 417 %.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Taulman3d |
| Product color | Natural |
| Product type | Filament |
Yes, Nylon 230 was developed specifically for systems with cold print beds and lower temp capabilities, printing at 228°C to 235°C with the bed at ambient temperature.
A successful print will show strong layer adhesion at the 228°C to 235°C range, with parts achieving 4980 PSI tensile strength and 417% elongation when printed on an ambient bed.
The box contains ten 1 lb spools of 2.85mm Natural Nylon 230 filament on 5-inch spools; no chemical additives are included, and the filament prints on an ambient bed so no heated bed upgrade is required.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?