BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
FDA-approved nylon filament for food-safe parts, prints at 250-255 °C on a 5-inch spool
Taulman 3D Nylon 680 is a pure-polymer filament rated for food and beverage contact under 21 CFR 177.1500 and 177.1395. It meets USP Class VI cytotoxicity requirements via MEM elution testing performed under FDA GMP regulations 21 CFR 210, 211 and 820. The material carries CAS registry number 51995-62-1 and contains no additives from chemical manufacturing or extrusion. It suits makers producing end-use parts that require regulatory compliance.
Printing temperatures of 250 to 255 °C and bed temperatures of 30 to 65 °C provide stable layer adhesion during long prints. The filament delivers a tensile strength of 6900 PSI with 34 percent elongation, indicating consistent mechanical performance across extended builds. Compatibility with ethylene oxide and flash steam post-processing allows repeated sterilisation cycles without degrading the polymer structure. Most FFF printers running standard Nylon 645 profiles can process this material without hardware changes.
This filament replaces standard nylons when FDA-approved food contact or validated sterilisation is required. The jump is worth it for medical device prototypes, custom kitchen tools or fluid-handling components that must pass regulatory review. It is not for buyers who need a lower printing temperature, a larger spool format or a filled composite for added stiffness. The 1 lb, 5-inch spool suits trial runs and low-volume production rather than continuous high-throughput printing.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Taulman3d |
| Product color | Natural |
| Product type | Filament |
It prints at 250-255 °C with a bed at 30-65 °C, temperatures typical for many FFF printers, and the pure polymer contains no additives from manufacturing or extrusion.
Yes, the filament is 2.85 mm diameter on a 5-inch spool weighing 1 lb, matching printers that accept that format.
The material is food and beverage rated, FDA approved under 21 CFR 177.1500 and 177.1395, and passes MEM elution cytotoxicity testing.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?