Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4-3200 ECC unbuffered server memory with CL22 timing at 1.20 V
The Team Group TE16GHLEV3BH is a 16GB DDR4 3200 ECC unbuffered DIMM built for server and workstation platforms that require error correction without registered buffering. It operates at 1.20V with a CAS latency of CL22 and 22-22-22 timings in a standard 288-pin form factor.
This module fits systems that accept unbuffered ECC DDR4 and can run at 3200 MT/s; it is not intended for platforms that demand registered or load-reduced DIMMs, nor for builds that need higher capacities per slot or lower latency kits. Buyers without ECC support in the CPU or chipset will not gain the error-correction benefit.
The single attribute that determines compatibility is the combination of unbuffered signalling with on-die ECC at the DDR4 3200 (PC4 25600) data rate; if the motherboard requires registered modules or cannot enable ECC in unbuffered mode, this DIMM will not function as intended.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Team |
| Model name | TE16GHLEV3BH |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Memory | |
| CAS latency | CL22 |
| Memory timings | 22-22-22 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Size & build | |
| Shipping weight | 0.45 kg |
| Package size | 178 × 127 × 76 mm |
Align the notch with the motherboard slot key, press firmly until both retention clips click, then verify in BIOS that ECC is enabled and speed reads 3200 MT/s.
No routine maintenance is required; if a correctable error count rises or the module fails POST, replace the stick with another DDR4 3200 CL22 1.20V 2Rx8 unit.
The 22-22-22 timing at 1.20V sets the latency floor; sustained throughput is capped by the DDR4 3200 (PC4 25600) data rate.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?