Team Group TM8FFH001T0C128 internal SSD 1TB M.2 2280
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 internal SSD with 4TB TLC storage, PCIe 4.0 x4 interface, up to 7400 MBps read and 6800 MBps write, plus aluminium heatsink
Capacity 4TB
This internal solid state drive uses the PCIe 4.0 x4 interface with NVMe 1.4 protocol and an InnoGrit controller. It provides 4TB of TLC storage backed by 4GB of DRAM cache for consumer workloads.
The aluminum heatsink and patented graphene option keep the drive within its 0°C to 70°C operating range during heavy use. Users who only need SLC caching or a thinner profile should consider the non-Pro G70 model instead.
This terabytes-written figure defines how much data can be written before the warranty period ends. It is the single metric that tells you whether the drive matches your write-intensive workload.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Team Group |
| Product line | T-FORCE G70 PRO (Aluminum) |
| Model name | TM8FFH004T0C128 |
| Total capacity | 4 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 7,400 MB/s |
| Sequential write speed | Up to 6,800 MB/s |
| Storage | |
| NAND flash type | TLC |
| Controller chip | InnoGrit |
| Cache memory | 4 GB DRAM |
| Write endurance | 2960 TB |
| Connectivity | |
| Connection protocol | NVMe 1.4 |
| Ports & slots | |
| Interface type | PCIe 4.0 x4 with NVMe 1.4 |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | With HeatSink |
| Overall height | 2.25 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 7g |
| Shipping weight | 0.09 kg |
| Package size | 147 × 117 × 13 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Operating humidity range | RH 90% under 40 °C (operational) |
| Max shock tolerance | 1,500G/0.5 ms |
| Vibration tolerance | 80 Hz~2,000 Hz/20G |
Other versions of this model
Yes — the TM8FFH004T0C128 is an M.2 2280 NVMe 1.4 SSD that runs on a PCIe 4.0 x4 interface, so the slot must provide those lanes.
It will operate at PCIe 3.0 x4 speeds on a 3.0 board, giving lower sequential throughput than the 7400 MBps read and 6800 MBps write ceiling.
Use the smart product status monitoring system mentioned by the manufacturer to check drive health, temperature and remaining TBW against the 2960 TBW rating.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?