Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a 1.8″ micro SATA drive to a 2.5″ SATA form factor for laptop installation
This blue PCB adapter converts a 1.8″ Micro SATA SSD or HDD to a standard 2.5″ SATA form factor. It is designed for owners of 1.8″ micro SATA drives who need to install them in a laptop or enclosure that only accepts 2.5″ SATA devices. The board fits Toshiba MK1216GSG, MK1235GSL, MK1629GSG and any other 1.8″ micro SATA drive.
The adapter contains no active electronics, so it simply passes the native SATA signals from the 1.8″ drive to the 2.5″ connector. Because there is no controller or buffer, throughput and latency remain identical to a direct drive connection. Heat is limited to the drive itself; the small PCB adds no thermal load during extended read or write sessions.
Align the 1.8″ drive with the Micro SATA header on the blue board, press it firmly into place, then insert the combined assembly into a 2.5″ SATA bay or caddy. The only common issue is a loose fit if the drive is not fully seated on the Micro SATA pins; double-check alignment before securing the assembly in the laptop.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Tekit |
| Product color | Blue |
| Adapter type | 1.8 in Micro SATA SSD HDD Hard Disk Drive to 2.5 in SATA Laptop Notebook Adapter PCB |
The passive PCB adapter has no moving parts and draws negligible power, so it adds no audible noise or measurable heat during continuous operation.
You need a 1.8" Micro SATA drive such as a Toshiba MK1216GSG, MK1235GSL or MK1629GSG, plus a system with a standard 2.5" SATA bay and cable.
Yes, the adapter simply converts the 1.8" Micro SATA interface to a 2.5" SATA form factor, so both drives can coexist on the same SATA controller.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?