THE ORDINARY 1007 4-pin to 3× fan splitter cable 10 in 2-pack
Connects three case fans to one motherboard header with a 10-inch sleeved 4-pin to triple 3/4-pin splitter in a two-pack
- Key featuresThis cable is compatible with all 4 pin and 3 pin case fans
- Connect three fans to one header with a 4-pin to 3-way splitter
- Black braided sleeving protects wires and resists abrasion inside the case
- 10-inch length reaches most fan mounting positions comfortably
- 24 AWG tinned-copper conductors rated for 80 °C ensure reliable power delivery
- Two-pack provides spare cables for multi-fan builds or future upgrades
4-pin to 3× fan splitter cable
The Ordinary 1007 is a 10-inch PWM fan splitter cable that connects three case fans to a single motherboard header. One end carries a 4-pin female connector while the other end provides one 4-pin and two 3-pin male connectors. Black braided sleeving protects the 24 AWG tinned copper conductors rated for 80 °C.
Builders adding multiple fans to one header
Suits anyone who needs to run three fans from a single 4-pin PWM header without buying a powered hub. Not for systems that require independent speed control per fan because all three connectors share the same PWM signal. Also unsuitable for headers with strict current limits that cannot support the combined draw of three fans.
Sustained load behaviour
The 11-strand 0.12 mm tinned copper conductors and PVC insulation rated to 80 °C handle continuous current from three fans without overheating. Braided sleeving resists abrasion inside crowded cases during long-term operation. Voltage drop across the 10-inch length remains minimal so fan speeds stay stable under constant load.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 60% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What motherboard header is required to connect the 4-pin female end of this splitter?
A standard 4-pin PWM fan header on the motherboard is required to power the splitter and all attached fans.
Will the two 3-pin male connectors still run fans if my older case fans only have 3-pin plugs?
Yes, the splitter provides one 4-pin and two 3-pin male connectors, so 3-pin fans connect directly and receive voltage-controlled speed.
How can I confirm the splitter is delivering power to all three fans after installation?
Power on the system and verify each connected fan spins; the motherboard fan-speed readout should report RPM for the fan attached to the 4-pin branch.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 10pcs DB9 Female to RJ45 Adapter Connector rs232 modular cab-9as-fdte internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





