THE ORDINARY 1007 PWM fan splitter cable 10.5 inches 4 pin to 3 pin and 4 pin
Connects three fans to one motherboard header using a 4-pin to 3-pin and 4-pin splitter with 10.5-inch braided sleeved cable
- Key featuresHIGH QUALITY: The fan PWM splitter Y-cable for PC motherboar
- Sleeve protects wires from dust and breakage
- 5 inch length reaches fans across the case
- 4-pin motherboard plug splits to three fan headers
- PWM signal passes through for automatic speed control
- Tinned copper conductors rated to 80 °C
Splitter cable for three fans
The Ordinary 1007 PWM fan splitter cable connects one motherboard header to three case fans. It uses a 4-pin female plug on the motherboard side and splits into two 3-pin and one 4-pin connectors. The 10.5-inch length suits compact or mid-tower builds. The cable is braided and sleeved for durability.
PWM control limited to the 4-pin fan
Only the single 4-pin fan connector returns a tachometer signal to the motherboard, so PWM speed control applies to that fan alone. The two 3-pin connectors receive voltage control only, which may limit low-speed precision. Builders who need independent PWM curves for every fan cannot achieve that with this splitter.
One 4-pin header drives three fans
The splitter lets three fans share one motherboard fan header, drawing combined power through that single connection. The 24 AWG tinned-copper conductors are rated for 80 °C. Buyers whose fans exceed the header’s current rating should not use this cable.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How long is the splitter cable and does it fit a standard motherboard header?
The cable measures 10.5 inches and connects a single 4-pin motherboard header to three fan connectors.
Can all three fans run under PWM control at once?
One 4-pin fan receives full PWM control while the two 3-pin fans run at constant voltage from the same header.
What wire gauge and insulation are used on the 1007 model?
It uses 24 AWG tinned copper conductors with PVC insulation rated to 80 °C.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





