THE ORDINARY 4-Pin Molex to 4 x 3/4-Pin Fan Sleeved Adapter Cable
Connects up to four 3-pin or 4-pin PWM case fans to a single Molex power connector with 30 cm black-sleeved cables
- Key featuresPower Four 3-Pin or 4-Pin (PWM Connector) PC Case Fans With
- Power four case fans from a single Molex connector
- Compatible with both 3-pin and 4-pin PWM fan headers
- Fans run at fixed 12 V Molex voltage
- High-density black sleeving gives an all-black look
- 30 cm total cable length using 24 AWG tinned copper wire
Molex to Quad Fan Adapter
This adapter cable connects a single 4-pin Molex power connector to four 3-pin or 4-pin PWM case fans. It solves the problem of insufficient motherboard fan headers or limited current capacity. The fans receive a fixed 12V supply from the Molex source, so speed control via PWM or voltage regulation is not possible. It is built for builders who need to run multiple fans from one power lead.
Installing the Splitter Cable
Installation is straightforward: plug the large 4-pin Molex end into a power supply lead and attach up to four fan connectors to the opposite ends. The black sleeved wiring uses 1007 24AWG tinned copper conductors with PVC insulation and an outer diameter of 1.4mm. The total cable length excluding connectors is 30cm, which may limit routing options in larger cases. No motherboard signal wire is present, so fan speed reporting and automatic control are unavailable.
Fixed Voltage Operation Limits
Because the adapter draws only the two power pins from the Molex connector, every attached fan runs continuously at the full 12V line voltage. This means 3-pin and 4-pin fans alike will spin at maximum speed with no thermal throttling or software adjustment. The assembly weighs 17 grams and is rated for 80°C operating temperature. It is not suited for builds that require variable fan curves or motherboard monitoring.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the adapter is powering all four fans correctly after connecting it?
The fans should spin at full speed because the Molex connector supplies a fixed 12V; check each fan visually or in BIOS to verify they are running.
What connectors and cables are included, and is anything else required?
The cable has one large 4-pin Molex plug on the power-supply end and four 4-pin fan headers on the other; no extra parts are needed.
Which version should I choose if my motherboard has both 3-pin and 4-pin fan headers?
This single adapter works with both 3-pin and 4-pin fans because each header accepts either connector type.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





