THE ORDINARY 4Pin 1 to 3 PWM Fan Splitter Cable Black Sleeved 27cm 10.5 inches
Connects three PWM fans to one motherboard header with speed control via a 27 cm black-sleeved 24 AWG cable
- Product colorBlack
- Key features4Pin 1 to 3 Ways PWM Fan Splitter Cable, to realize 3 fans p
- Connect three fans to one motherboard header for PWM speed control
- High-density black sleeved 24 AWG cable resists wear and keeps wiring tidy
- Single yellow RPM wire reports one fan speed to avoid motherboard confusion
- Works with both 3-pin and 4-pin fans for broad compatibility
- 27 cm (10.5 inches) length extends the 4-pin header for flexible routing
PWM splitter for triple-fan control
This black-sleeved cable splits a single motherboard 4-pin header into three 4-pin fan connectors, letting three fans share one PWM speed-control signal. It is built for PC builders who want tidy cable routing and synchronised fan speeds without occupying extra headers.
Single tachometer wire avoids sensor confusion
Only one of the three output connectors carries the yellow RPM reporting line, so the motherboard sees a single speed reading instead of three conflicting ones. The 24AWG sleeved wires keep the bundle flexible and resistant to abrasion inside a crowded case.
Works with 3-pin and 4-pin fans at 27 cm length
The 27 cm (10.5 inches) reach lets you route from a CPU or chassis header to nearby fans without strain. Compatibility with both 3-pin and 4-pin fans means older voltage-controlled models can also be powered, though they will run at full speed without PWM regulation.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
Will the yellow RPM wire on this splitter ever need replacing?
The yellow RPM wire is soldered into the single reporting connector and cannot be swapped independently; if it fails the whole 24AWG sleeved assembly must be replaced.
What stops me from running more than three fans off one header with this cable?
The splitter provides exactly three 4-pin male ends, so the physical connector count is the hard limit.
Does the black sleeving trap heat when three fans run all day?
The 24AWG conductors and open-air sleeving dissipate the low PWM control current without noticeable temperature rise.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 1.2m internal power cable with dual USB and audio
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





