Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A machined brass spacer adds 14 mm between G1/4 ports using an 8 mm hex key
The Thermal Grizzly TG-DM-FIT-0007 is a 14 mm fixed-length extender with G1/4 male and female threads. Machined from brass with a matte-black chromium finish, it adds precise spacing between a component port and a fitting. An EPDM O-ring provides the seal and resists ozone and UV exposure. The uniform outer diameter matches other DeltaMate fittings for a consistent look.
Verify that both the component port and the mating fitting use G1/4 threads. Confirm that an additional 14 mm of axial space is available in your loop layout. The fitting requires an 8 mm hex key for installation, so ensure tool access is not blocked by adjacent hardware. The brass construction is anodically compatible with common water-cooling metals.
Use this extender instead of chaining multiple fittings or bending tubing to bridge small gaps. The 14 mm step is worth it when a single, rigid spacer simplifies routing and reduces potential leak points. Builders who need a different offset or a rotating angle should look for alternative DeltaMate models.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-DM-FIT-0007 |
| Part number | TG-DM-FIT-0007 |
| Product color | Black |
The machined brass body ships with a highly elastic EPDM O-ring already seated in the groove, so no separate seal purchase is needed.
Choose the MF14 when the gap between a component port and the fitting needs to be exactly 14 mm; other DeltaMate extenders cover different fixed lengths.
It pushes the fitting 14 mm farther from the port, clearing obstructions and aligning tubing runs while keeping the uniform DeltaMate outer diameter.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?