Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Three 120 mm ARGB fans with reversible blades, PWM 500–2000 RPM and hydraulic bearings
The Thermaltake SWAFAN EX12 comes as three white 120 mm case fans with hydraulic bearings and addressable RGB lighting. Each unit runs at 500 to 2000 RPM via PWM control and includes both standard and reverse blade sets for flexible airflow direction. The pack suits builders who want coordinated lighting and push-pull or intake-exhaust configurations without buying separate kits.
The fans draw power and signal through a 2510 4-pin PWM connector and a 5 V ARGB 3-pin header, so the motherboard must supply both. Maximum airflow reaches 57.11 CFM on the standard blade and 56.26 CFM on the reverse blade, with noise rated at 30.6 dB-A and 32.5 dB-A respectively. No hardware controller is included, so all speed and lighting curves depend on motherboard software support.
Verify that your board has at least one 5 V ARGB header and enough 4-pin PWM headers for three fans, or plan for a powered splitter. Each frame measures 120 by 120 by 25 mm, so confirm mounting points and cable routing space in your chassis. The reversible blades are swapped manually, so allow time for installation if you intend to mix orientations.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermaltake |
| Model name | SWAFAN EX12 |
| Part number | CL-F169-PL12SW-A |
| Product type | Case Fan |
| Product color | White |
| Performance | |
| Rotational speed | PWM 500 to 2000 R.P.M |
| Airflow rate | Standard Fan Blade: 57.11 CFM (one fan) Reverse Fan Blade: 56.26 CFM (one fan) |
| Power | |
| Power input connector | 2510-4 PIN PWM, 5 V ARGB header-3PIN |
| Size & build | |
| Fan size | 120 mm |
| Number of fans | 3 Fans |
| Fan depth | 25 mm |
| Bearing design | Hydraulic |
| Product dimensions | 120 × 120 × 25 mm |
| Shipping weight | 1.04 kg |
| Package size | 185 × 170 × 130 mm |
| In the box | |
| In the box | 3 x Fan Frames 3 x Standard Fan Blade (Pre-installed) 3 x Reverse Fan Blade 3 x Cable |
| Environment & compliance | |
| Operating noise | Standard Fan Blade: 30.6 dB-A (one fan) Reverse Fan Blade: 32.5 dB-A (one fan) |
| More details | |
| Fan control | No Controller |
| LED lighting | ARGB |
Standard blades are pre-installed and deliver 57.11 CFM at 30.6 dB-A; reverse blades give 56.26 CFM at 32.5 dB-A — use reverse blades when you need intake airflow pulled through a radiator or restrictive filter.
At full 2000 RPM a single fan moves 57.11 CFM while producing 30.6 dB-A — three fans scale airflow proportionally but combined noise rises only a few decibels, giving strong cooling with low audible hum.
Yes — the 4-pin PWM connector lets the board control speed between 500 and 2000 RPM, and the 3-pin 5 V ARGB header syncs lighting with any motherboard that supports 5 V addressable RGB.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?