Thermaltake PCI-E 4.0 200mm Extender 90° Adapter
A 200 mm PCI-E 4.0 riser cable with a 90-degree adapter, EMI shielding and a cable protector for durable high-speed GPU connections
- PCIe 4.0 bandwidth up to 16 Gbps for high-speed data
- 90° adapter eases routing in tight cases
- 200 mm length gives flexible placement options
- EMI shielding with conducting polymer protects signal integrity
- Exclusive cable protector reinforces durability and prevents damage
PCI-E 4.0 Extender with 90° Adapter
This 200 mm riser cable carries PCI-E 4.0 signals through a right-angle connector, letting a graphics card sit parallel to the motherboard in tight chassis layouts. It targets builders who need to route a full-length GPU away from the primary expansion slot without losing bandwidth.
High-speed shielded cable for compact builds
The flat five-sole design incorporates conducting-polymer EMI shielding to maintain signal integrity at up to 16 Gbps, while the integrated cable protector reinforces the bend radius at the 90° joint. No extra power connectors or active circuitry are required; the extender draws all signalling power from the slot itself.
Replaces standard straight risers
The upgrade is worthwhile when a vertical GPU mount, small-form-factor case, or custom loop forces the card into a parallel orientation and a straight cable would kink or block airflow. Builders who can keep a conventional horizontal installation gain no advantage from the angled adapter.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $69.99
- Pricier than about 89% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How far can I route the cable before signal quality drops?
The extender is 200 mm long and rated for PCI-E 4.0 speeds up to 16 Gbps, so routing within that length maintains full bandwidth.
Will the cable add noticeable heat or fan noise inside the case?
It is a passive cable with EMI shielding and a five-sole flat design, so it generates no heat and adds no acoustic load.
What motherboard slot and graphics card connector does this need?
It requires a standard PCI-E x16 slot on the motherboard and a matching x16 edge connector on the graphics card.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





