Micro Connectors NGFFM2-HS803-BK 10mm SSD cooling
- Aluminum, silicone
- Supports 2280 lengt…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A heatsink with four copper heat pipes and a 30 mm PWM fan lowers M.2 2280 NVMe drive temperatures by roughly 30 to 40 °C and includes thermal tape.
The Titanium Micro Nitro Pro is an active cooler built for single-sided or double-sided M.2 NVMe 2280 solid-state drives. It combines four pure copper heat pipes with a 30 mm PWM fan to move heat away from the drive during sustained workloads. The kit includes thermal tape, screws and a screwdriver for straightforward desktop installation.
This cooler suits desktop builders who can accommodate a 30 mm fan and need lower drive temperatures under heavy write loads. It is not intended for fanless systems that rely on passive dissipation, nor for laptops or small-form-factor chassis where a 30 mm fan cannot be mounted or powered.
The manufacturer states the Nitro Pro can reduce SSD temperatures by approximately 30 to 40 °C depending on the environment, and by an additional 10 to 20 °C compared with passive heatsinks. This figure is the primary indicator of whether the cooler meets a specific thermal target.
Measured against everything we stock in Drive & M.2 SSD Heatsinks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Yes, it mounts directly onto a single- or double-sided NVMe 2280 SSD in a standard desktop M.2 slot and includes thermal tape, screws and a screwdriver for installation.
The low-profile heatsink sits close to the drive; most standard DIMMs and graphics cards leave enough clearance, but verify your board layout before fitting.
Monitor the SSD temperature in BIOS or software — expect a drop of roughly 30 to 40 °C under load, and the fan should spin up automatically as the drive warms.
More in Drive & M.2 SSD Heatsinks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?