TP-Link MC110CS Fast Ethernet Media Converter 10/100 Mbps 20km SC RJ45
Converts 10/100 Mbps RJ45 to single-mode SC fiber up to 20 km with Auto MDI/MDIX and link fault passthrough
- Port count1 × 100M SC port 1 × 100M RJ45 port (Auto MDI/MDIX)
- Supported standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3x
- Fiber modeSingle-mode Fiber
- Maximum rangeUp to 20km
- Transfer speed10/100 Mbit/s
- Indicator lightsPWR, FDX/Col, Link/Act, SPD
- Extends network reach up to 20 km over single-mode fiber
- Auto MDI/MDIX RJ45 port removes crossover cable hassle
- Link Fault Passthrough detects failures fast to limit data loss
- IEEE 802.3x flow control keeps traffic smooth at 10/100 Mbps
- Compact 3.7 x 2.9 x 1.1 in chassis fits tight spaces
Product Role
The TP-Link MC110CS is a Fast Ethernet media converter that links a 10/100 Mbps copper segment to a single-mode SC fiber run. It suits installers who need to bridge a building-to-building gap or extend a legacy 100 Mbps network beyond the reach of twisted-pair cabling.
Sustained Operation
The unit runs from an external power adapter and is rated for continuous use between 0 °C and 40 °C with humidity up to 90 % non-condensing. Link Fault Passthrough and Far End Fault signalling detect fibre breaks quickly, reducing the time a segment stays down during a cable fault.
Deciding Specification
The converter supports single-mode fibre up to 20 km, so it is the right part only when the fibre path is single-mode and the required distance fits within that limit. It will not operate on multi-mode fibre or exceed the 20 km reach.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $27.99
- Cheaper than about 89% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | TP-Link |
| Model name | MC110CS |
| Performance | |
| Transfer speed | 10/100 Mbit/s |
| Connectivity | |
| Supported standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Fiber mode | Single-mode Fiber |
| Maximum range | Up to 20km |
| Ports & slots | |
| Port count | 1 × 100M SC port 1 × 100M RJ45 port (Auto MDI/MDIX) |
| Power | |
| Power adapter | External Power Adapter |
| Size & build | |
| Product dimensions | 3.7 in × 2.9 in × 1.1 in |
| Environment & compliance | |
| Temperature range | 0° ~ 40 °C |
| Humidity range | 10%~90% non-condensing |
| More details | |
| Indicator lights | PWR, FDX/Col, Link/Act, SPD |
Questions about this item
How much power does the TP-Link MC110CS draw when running continuously?
The unit ships with an external switching power adapter and operates within a 0°C to 40°C temperature range, so typical draw is low enough for passive cooling in a ventilated cabinet.
What cabling and patch panels must I already have to use the SC and RJ45 ports?
You need single-mode fibre terminated with SC connectors for the 100M FX port and standard Cat5 or better copper patch leads for the 10/100M RJ45 port, which supports Auto MDI/MDIX.
Will this converter link reliably to a legacy 10 Mbps half-duplex switch on the copper side?
Yes, the RJ45 port complies with IEEE 802.3 and 802.3u, auto-negotiates 10 or 100 Mbps, and supports half-duplex flow control via backpressure for older equipment.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH AR-SFP-1G-SX-ST SFP transceiver 1000 Mbps 850nm LC 550 m
- LC
- Transceiver
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Finisar Corporation FTLF8528P2BNV-EM 8 Gb/S Short-Wavelength SFP+ Transceiver
- Transceiver
- HCRP, SPP
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Brute Networks 10GBase-LR SFP+ 10km 1310nm JD094B
- Transceiver
- SMF





