Transition Networks Gigabit Ethernet Media Converter RJ-45 LC 850 nm 0.55 km
Converts 1000Base-T RJ-45 to 1000Base-SX multi-mode fibre at 850 nm for 0.55 km links
- Brand compatibilityLantronix
- Gigabit Ethernet speed with 1000 Mbit/s throughput
- Plug-and-play deployment via fixed configuration
- Low-latency performance operating at Layer 1
- Multi-mode fiber connectivity up to 0.55 km
- Compact design fits space-constrained installations
Media Converter for Gigabit Fibre Links
This Transition Networks media converter bridges a copper RJ-45 port and an LC multi-mode fibre port at 1000 Mbit/s. It operates at 850 nm wavelength over distances up to 0.55 km. The plug-and-play design requires no configuration and passes traffic at line speed for low-latency connections.
Suited for Short-Range Multi-Mode Deployments
Installers extending a Gigabit Ethernet segment across a building or campus using existing multi-mode fibre will find this unit fits the requirement. Buyers needing single-mode reach beyond 0.55 km or a different connector type should select an alternative device.
850 nm Multi-Mode Reach of 0.55 km
The fixed 850 nm multi-mode interface limits the link to 0.55 km, so the fibre run must stay within that distance. Verify that the existing cabling plant matches this wavelength and reach before purchase.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $183.99
- Pricier than about 58% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Compatibility | |
|---|---|
| Brand compatibility | Lantronix |
Questions about this item
What type of RJ-45 network cable do I need to connect the 1000Base-T side?
Use a standard Cat5e or better twisted-pair cable; the RJ-45 port negotiates 1000 Mbit/s full-duplex automatically.
Can I link this converter to an existing 100 Mbit/s switch on the copper side?
The 1000Base-T port is fixed at Gigabit speed and will not negotiate down to 100 Mbit/s, so the link will not come up.
How do I confirm the fiber link is operating at the rated 0.55 km distance?
The LC port LEDs show link and activity; a steady link light with traffic blinking indicates the 850 nm multi-mode path is working at line speed.
More in SFP & SFP+ Transceiver Modules
Similar items
TRENDnet TEG-10GBS10 10GBASE-LR SFP+ transceiver 1310nm 10km
- 10GBase-LR
- Transceiver
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
AddOn FTLX1471D3BCL-AO SFP+ transceiver 10 Gbps 1310nm 220m LC
- SFP+
- Finisar®
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
AddOn GLC-LH-SMD-AO-5PK SFP transceiver 10km 1310nm LC DOM 5-pack
- Cisco®
- Transceiver





