Transition Networks M/GE-PSW-SX-01-EU SFP transceiver RJ-45 SC 850 nm 0.55 km
Converts 10/100/1000Base-T copper to 1000Base-SX multi-mode fibre over 0.55 km at 850 nm
- Brand compatibilityTransition Networks
- Connects RJ-45 copper devices to SC fibre links
- 10/100/1000Base-T and 1000Base-SX dual-rate support
- 850 nm multi-mode fibre reaches 0.55 km
- Miniature form factor saves rack and desk space
- Cost-effective path from legacy 10/100 to gigabit fibre
Mini Media Converter for Legacy Copper-to-Fibre
This Transition Networks mini media converter bridges 10/100/1000Base-T copper links to 1000Base-SX fibre. It targets administrators who must connect older 10 or 100 Mbps devices to gigabit infrastructure without replacing existing cabling or switches.
Plug-and-Play Installation with Duplex SC Connector
The module requires no software configuration; simply insert the RJ-45 patch cord and duplex SC fibre cable. The main risk is mismatching the 850 nm multi-mode fibre type or exceeding the 0.55 km reach, which causes link failure or excessive errors.
Verify Copper Speed, Fibre Type
Confirm the copper port will negotiate at 10, 100 or 1000 Mbps and that the remote end uses 850 nm multi-mode fibre with a duplex SC interface. The 0.55 km limit rules out longer campus or metro spans, and single-mode fibre will not operate with this unit.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $243.99
- Pricier than about 65% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Shipping weight | 0.54 kg |
| Package size | 366 × 249 × 157 mm |
| Compatibility | |
| Brand compatibility | Transition Networks |
Questions about this item
How can I confirm the link is operating at Gigabit speed after installing the M/GE-PSW-SX-01-EU?
Check the port LEDs on the connected switch or router; a steady 1000Base-SX indicator shows the transceiver has negotiated 1000 Mbps over the 850 nm multi-mode fiber link.
What cables and connectors are included with the M/GE-PSW-SX-01-EU and what must I source separately?
The unit provides one RJ-45 port and one duplex SC port; you supply the Cat5e or better patch cord for the copper side and a duplex multi-mode patch cable with SC connectors for the 850 nm fiber run up to 0.55 km.
Which version of this transceiver should I choose for a 0.55 km multi-mode run at 850 nm?
The M/GE-PSW-SX-01-EU is the single model rated for 1000Base-SX at 850 nm over multi-mode fiber up to 0.55 km, so select this part when those exact distance and wavelength parameters match your link.
More in SFP & SFP+ Transceiver Modules
Similar items
AddOn SFP-10GB-SR-AO SFP+ transceiver 10 Gbps 850nm 300m LC
- LC
- 850 nm
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Brocade E1MG-TX 1 Gbps RJ-45 SFP transceiver
- RJ-45
- 1 Gbit/s
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Axiom SFP-532-AX 10GBASE-SR SFP+ transceiver
- 10GBase-SR
- Transceiver





