TRENDnet TEG-10GBSR/2 2-Pack 10GBASE-SR SFP+ Transceivers
A two-pack of hot-pluggable SFP+ transceivers for 10.5 Gbps multi-mode links up to 300 m over 850 nm fibre with LC duplex connectors and DDM
- Product weight0.28
- Two 10GBASE-SR transceivers in one pack
- Hot-pluggable SFP+ modules install without downtime
- MSA compliant for broad switch compatibility
- Multi-mode fibre reaches 300 m (984 ft) at 850 nm
- Digital Diagnostics Monitoring reports power, temperature and voltage
Two-pack 10GBASE-SR SFP+ modules for short-reach
This two-pack supplies a pair of TRENDnet TEG-10GBSR transceivers built for 10 GbE connections over multi-mode fibre. Each hot-pluggable SFP+ module fits any MSA-compliant port, so network teams can upgrade uplinks or server links without powering down switches. The 850 nm wavelength and duplex LC interface target data-centre racks and campus cabinets where runs stay inside the 300 m limit. Buyers needing single-mode reach or longer campus spans should choose a different transceiver type.
10.5 Gbps headroom with 300 m multi-mode range
Rated throughput reaches 10.5 Gbps, giving comfortable headroom above the 10 GbE line rate for overhead and burst traffic. The 850 nm VCSEL optics are specified for up to 300 m (984 ft) on OM3 or OM4 multi-mode fibre, covering typical row-to-row and cross-aisle links. Beyond that distance the optical budget is exhausted, so metro or building-to-building runs will require alternative optics. The module does not support single-mode fibre or extended-reach multi-mode standards.
MSA-compliant build with LC duplex and DDM
Each transceiver follows the SFP+ MSA mechanical and electrical specification, ensuring latch-in retention and consistent pin-out across vendors. The duplex LC connector uses a standard push-pull action that works with existing patch cords and cassette panels. On-board Digital Diagnostics Monitoring reports real-time TX and RX power, temperature and supply voltage through the host switch, allowing proactive link-health checks without external test gear. The 0.28 kg pack weight confirms a lightweight, dense form factor for high-port-count deployments.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $44.99
- Cheaper than about 76% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | TRENDnet |
| Model name | TEG-10GBSR/2 |
Questions about this item
Will these TEG-10GBSR modules work in my existing SFP+ switches that follow the MSA standard?
Yes, the TEG-10GBSR/2 pack contains two hot-pluggable SFP+ transceivers built to the SFP+ MSA specification, so they fit any MSA-compliant SFP+ port.
How can I verify each module is operating correctly once installed?
Each transceiver supports Digital Diagnostics Monitoring (DDM), which reports real-time transmit power, receive power, temperature and voltage so you can confirm link health.
What comes in the 2-pack and what cables must I supply?
The box includes two TEG-10GBSR modules with duplex LC connectors; you will need to provide multi-mode fibre patch cords with LC ends to complete the 850 nm links up to 300 m.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH J4858CST 1000BASE-SX SFP transceiver 850nm 550m
- Transceiver
- IEEE 802.3z 1000BAS…
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
STARTECH JD089BST SFP transceiver 1000BASE-T RJ45 100m
- Hot-pluggable, Hot-…
- HPE Switches:, 5820…
AddOn J4858C-AO SFP transceiver 1000Base-SX 850nm 550m LC
- Transceiver
- TCP/IP
STARTECH CG-ST SFP transceiver 1000Base-TX RJ-45 100m
- 1000Base-TX
- SFP Transceiver Mod…





