Tripp Lite N455-000-S-PM data adapter LC
Duplex singlemode fibre coupler joins two LC patch cables for network links
- Adapter typeLC
- Product colorBlue
- DetailsConnector on First End:2 x LC Female Network Connector on Se
- Singlemode fibre link ready with duplex LC coupler
- Blue housing identifies singlemode patching at a glance
- Two LC female ports connect patch cables directly
- Passive design needs no power or configuration
- Tripp Lite build quality for reliable network joins
What this adapter is
The Tripp Lite N455-000-S-PM is a duplex fibre optic coupler designed for singlemode networks. It connects two LC female connectors on each end to extend or join cable runs. Network installers and IT teams use it to bridge patch cords in structured cabling systems.
What the LC duplex coupling changes
The LC/LC duplex alignment allows two fibres to be joined in a single compact unit while maintaining correct polarity. Its blue housing identifies singlemode performance at a glance. The coupler adds no active electronics, so it introduces no latency or power requirements.
Singlemode fibre compatibility decides fit
This coupler is built exclusively for singlemode fibre with LC connectors. It will not work with multimode cable or SC, ST, or MTP interfaces. Buyers needing multimode links or different connector types must choose a different coupler.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 55% of the 353 comparable items (median $21.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Tripp Lite |
| Model name | N455-000-S-PM |
| Product color | Blue |
| Adapter type | LC |
| Size & build | |
| Shipping weight | 0.01 kg |
| Package size | 152 × 124 × 23 mm |
Questions about this item
Will the LC ferrules need periodic cleaning or replacement as the coupler ages?
The LC ferrules are passive ceramic sleeves; they do not wear out, but dust caps should be used when idle and the faces cleaned with a lint-free wipe and isopropyl alcohol before each reconnect.
What limits insertion loss when the coupler is used continuously in a singlemode link?
Insertion loss is set by the factory-polished LC ceramic ferrules and the alignment sleeve; it remains constant as long as the end faces stay clean and the connectors are fully seated.
Does the coupler generate any heat or draw power when the link runs all day?
The coupler is a passive mechanical device with no electronics, so it produces zero heat and consumes zero power regardless of how long the optical signal passes through it.
More in Interface & Card Adapters
Similar items
SMUGDESK Oculink SFF-8611 SFF-8612 4X to PCIe x16 Adapter with ATX 24Pin Power
Silverstone ECD01 USB 2.0 to dual RS232 data adapter
- ATX Mid Tower





