TSUJ 2 in 1 accessory Kepler-C72J-OYS-0207 12V 0.4W 2cm blower
A 2 cm blower fan running at 12 V and 0.4 W with two wires and a 2-pin connector
- Key features2006 MF20061V2-1C02C-A99 12 V 0.4 W 2Wires 2Pin 2 cm Blower
- Compact cooling from a 2 cm blower design
- Low 0.4 W draw keeps system power efficient
- 12 V operation suits standard laptop rails
- Two-wire 2-pin connector simplifies installation
- High-turn micro fan moves air in tight spaces
2 cm 12 V blower for tight spaces
This micro blower measures two centimetres across and runs on twelve volts at 0.4 watts. It is built for 2-in-1 laptops and other compact devices where a standard axial fan will not fit. The two-wire, two-pin connector simplifies installation in factory headers. Technicians and modders working on thin profiles will find it a direct match.
Low power headroom for targeted cooling
At 0.4 watts the unit moves a focused stream of air through narrow ducts without drawing heavy current from the system rail. It handles localized hot spots such as voltage-regulator zones or small heatsinks, but it cannot replace a full-size system fan for bulk airflow. The high-turn design keeps pressure up in restrictive paths, yet sustained loads on larger surfaces will exceed its capacity.
Direct swap for MF20061V2 originals
The part number matches the 2006 MF20061V2-1C02C-A99 blower used in several legacy 2-in-1 models, so it drops into the same mounting holes and connector. Upgrading makes sense when the original fan has seized, grown noisy or lost speed after years of service. Buyers needing higher static pressure or a larger frame will need a different solution.
How it compares
Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 95% of the 6,330 comparable items (median $55.99).
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | TSUJ |
| Part number | Kepler-C72J-OYS-0207 |
Questions about this item
Will the 2Pin connector on this 12V blower mate with the header on my 2006-era laptop fan board?
The unit uses a 2Pin 2Wire connection; verify the pin pitch and polarity against your board before fitting.
How can I confirm the 0.4W blower is spinning correctly once installed?
Power the 12V supply and check for steady airflow from the 2cm outlet and a smooth, high-turn sound without vibration.
Does the Kepler-C72J-OYS-0207 package include mounting screws or a wiring harness?
Only the blower with its 2Wire 2Pin lead is supplied; screws, brackets or extension cables must be sourced separately.
More in 2-in-1 Device Accessories
Similar items
DELL XPS 11 9P33 Palmrest Touchpad Keyboard Swedish AZERTY 2 in 1 accessory
- Palmrest Touchpad k…
- Black
DELL Intel i350-T4 4-Port PCI-E 2.1 x4 1GbE 4x RJ45 Full-Height 2 in 1 accessory
TSUJ Kepler-C72J-OYS-0326 4020 4CM 12V .15A 3 Wires 3 Pins Case Fan
- 4020 4CM 1608KL-04…
TSUJ 3010 30*10mm FD123010HB 12V 0.11A 2-wire 2-pin mini fan 3cm case cooler
- 3010 30 × 10 mm FD1…





