tuanyuan CPU cooling fan Dell Latitude 3500 15.6 T6RHW
Replaces the CPU and GPU cooling fan in a Dell Latitude 3500 15.6 using a plug-and-play flex cable connector
- Accessory categoryCooler
- Product colorBlack
- Direct replacement for Dell Latitude 3500 15.6
- Tested before shipping for reliable operation
- Integrated flex cable enables plug-and-play install
- Fixes loud, faulty or overheating CPU/GPU fan
- Compare photo to your part before ordering
Direct-fit replacement for Dell Latitude 3500
This new CPU cooling fan is built to match the Dell Latitude 3500 15.6 chassis exactly. It addresses loud operation, error alerts and overheating caused by a worn or broken original cooler. The part restores normal thermal performance without modification.
Connector varies between two and six pins
The replacement uses an integrated flex cable that plugs straight into the mainboard. Because the pin count can be two, three, four, five or six, you must verify the existing fan’s connector before ordering. A mismatched plug will prevent installation.
Requires disassembly skill and powered-off work
Special technique is needed to open the laptop and swap the fan safely. The supplier stresses comparing the old unit to the listing photos first. Installation must be done with the machine completely off to avoid damage.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 91% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Model name | Latitude 3500 |
| Part number | T6RHW |
| Accessory category | Cooler |
| Product color | Black |
Questions about this item
How does the fan keep a 15.6-inch Latitude 3500 running at normal temperatures?
The fan replaces the original CPU and GPU cooler, using an integrated flex cable with a multi-pin connector to plug directly into the mainboard for immediate airflow.
What connector does the replacement fan use to attach to the mainboard?
It ships with an integrated flex cable that ends in a 2-pin, 3-pin, 4-pin, 5-pin or 6-pin connector for a solder-free, plug-and-play fit.
What physical steps are needed before the new fan will mount inside the chassis?
Remove the existing fan, compare it to the listing photo to confirm the screw holes and cable routing match, then install with the laptop powered off.
More in Laptop Cooling Stands & Fans
Similar items
DELL Latitude D610 Precision M20 14.1" LCD Back Top Cover Assembly D4553 Gray
- Back Top Cover
- Gray
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…





