We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tycon Power Systems

Tycon Power Systems TP-DCDC-1248G-HP 10-15VDC to 56V Passive PoE 50W

SKU CH-YAD2-P99DD

Converts 10-15VDC to 56V Passive PoE at 50W with surge and overload protection

  • Converts 10–15 VDC battery power to 56 V passive PoE
  • Delivers up to 50 W for PoE devices from a 12 V source
  • Injects power on pins 4,5 and 7,8 via shielded RJ45 jacks
  • Built-in surge, short-circuit and overload protection for reliable operation
  • Low-cost, high-reliability solution for 48 V PoE from ±12 V battery systems

Purpose and fit

The TP-DCDC-1248G-HP converts a 10 to 15 VDC source into 56 VDC passive Power over Ethernet. It suits installers who need to run PoE devices from a 12 V battery bank or similar low-voltage supply.

Deciding specification

The converter delivers up to 50 W on the PoE output while accepting 10 to 15 VDC input. If the connected device draws more than 50 W or the source falls outside the 10 to 15 VDC window, the unit will not operate correctly.

Capacity and headroom

At 50 W the inserter comfortably powers typical 48 V passive PoE radios, cameras or access points. Loads above 50 W exceed its rating and will cause shutdown or unreliable operation.

How it compares

Measured against everything we stock in Patch Panels, PoE & LAN Adapters, at today’s prices. Recalculated every night.

Price $70.99
Pricier than about 55% of the 556 comparable items (median $56.99).

New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTycon Systems

Questions about this item

How much power can the converter actually deliver to a connected device from a 12 V battery?

The unit supplies up to 50 W at 56 V Passive PoE on the output jack, drawing from a 10–15 VDC source.

What Ethernet speeds does the passive PoE injector support on its shielded RJ45 ports?

Data passes through the shielded RJ45 jacks unchanged; the injector adds 56 V on pins 4,5 and 7,8 without negotiating, so any standard link works.

What input voltage range and connector does the converter need for installation?

It requires a 10–15 VDC supply connected to the DC input terminals and accepts data on a shielded RJ45 jack for PoE output.

More in Patch Panels, PoE & LAN Adapters

Similar items