Ubiquiti Networks UACC-OM-MM-10G-D 10G Multi-Mode SFP+ Transceiver 850nm 300m
SFP+ transceiver delivers 10 Gbps over multi-mode fiber up to 300 m at 850 nm wavelength with a duplex LC UPC connector
- Form factorSFP+
- Power draw0.8 W
- Optical wavelengthTX Wavelength: Black latch: 850 nm RX Wavelength: Black latc
- Transfer speed10 Gbit/s
- 10 Gbps transfer rate for high-speed links
- Reaches 300 m over multi-mode fiber
- 850 nm wavelength suits short-range deployments
- SFP+ form factor fits standard switch slots
- Low 0.8 W power draw reduces heat load
Ubiquiti 10G Multi-Mode SFP+ Transceiver
This Ubiquiti SFP+ transceiver delivers 10 Gbps links over multi-mode fiber up to 300 metres. It suits network engineers and integrators who need reliable short-range 10G connectivity in enterprise or campus environments. The duplex LC UPC interface fits standard SFP+ ports on switches and routers.
Thermals noise and power draw
Maximum power consumption is rated at 0.8 W, keeping heat output low inside dense chassis. Passive operation means no fan noise is added to the rack. The modest draw helps maintain headroom on switch power budgets when multiple modules are installed.
Build quality and daily implications
The module uses a black latch to identify its 850 nm wavelength for both transmit and receive. Duplex LC UPC connectors provide secure, repeatable mating for patch cords. Hot-pluggable SFP+ form factor allows insertion or removal without powering down the host equipment.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 96% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Ubiquiti Networks |
| Model name | 10G Multi-Mode Optical Module |
| Part number | UACC-OM-MM-10G-D |
| Performance | |
| Transfer speed | 10 Gbit/s |
| Connectivity | |
| Optical wavelength | TX Wavelength: Black latch: 850 nm RX Wavelength: Black latch: 850 nm |
| Power | |
| Power draw | 0.8 W |
| Size & build | |
| Form factor | SFP+ |
| Shipping weight | 0.05 kg |
| Package size | 97 × 28 × 18 mm |
Questions about this item
How do I install the SFP+ transceiver into a switch port without damaging the 850 nm optics?
Power down the switch, remove the dust caps, align the module with the SFP+ cage, and push firmly until the latch clicks; the black latch identifies the 850 nm wavelength so you can confirm the correct module before locking it in
What maintenance or replacement will the duplex LC UPC connector need over time?
Inspect and clean the LC UPC ferrule ends with a lint-free wipe and isopropyl alcohol whenever you disconnect the patch cord; replace the patch cord if the ferrule shows scratches or the insertion loss rises above the link budget
What limit appears first when running the 10 Gbps link continuously at full load?
The 300 m reach on multi-mode fiber is the first constraint; beyond that distance the 850 nm signal attenuates too much for reliable 10 Gbps operation even though the module only draws 0.8 W
More in SFP & SFP+ Transceiver Modules
Similar items
Other Electricities SFP transceiver AGM732F 1.25Gbps 1310nm 10km Duplex LC SMF
- Sfp
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Pentel of America, Ltd. P205MBP3M .5 mm SFP transceiver 3 pack
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Other Electricities SFP Transceiver J4859C 1000BASE-LX 1310nm 10km
- Sfp





