Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two brass V6 nozzles with 0.25 mm bore for 1.75 mm filament, M6 thread
Two brass nozzles with a 0.25 mm orifice and M6 thread for V6 extruder heads. They accept 1.75 mm filament and measure 12 x 7 mm overall. Designed for non-abrasive materials such as PLA, ABS and PCL.
Verify that your printer uses a V6-style hot-end with an M6 thread and 7 mm thread length. Confirm the filament path is sized for 1.75 mm stock. Stamped size on each nozzle helps identify the 0.25 mm bore before installation.
Heat the hot-end to the material range, hold the heater block with a spanner and exchange the nozzle using a socket driver. After fitting, recalibrate the nozzle-to-bed distance to restore first-layer quality. Pack contains two nozzles for a spare or quick change.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The package contains two brass nozzles stamped with their 0.25 mm size. Installation requires a spanner to hold the heat block and a socket screwdriver; these tools are not included.
This listing supplies only the 0.25 mm diameter version, which is suited for fine-detail prints with 1.75 mm PLA, ABS or PCL filaments. Choose a different diameter if you need faster printing or stronger layers.
The 0.25 mm bore produces finer detail than larger nozzles, but extrudes less material per second. Print at 180–220 °C for PLA or 240–280 °C for ABS and recalibrate the nozzle-to-bed gap after fitting.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?