Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 0.3 mm stainless-steel MK8 nozzle pair for 1.75 mm filament with M6 thread and smooth bore
This two-piece set provides 0.3 mm diameter nozzles built from stainless steel for MK8-style hot ends that accept 1.75 mm filament. The M6 thread with a 5 mm length matches the standard MK8 pattern, making the parts suitable for owners of compatible 3D printers who need a harder-wearing tip for abrasive filaments.
Installation requires heating the hot end to the printing temperature, then unscrewing the old nozzle while holding the heater block with a spanner and fitting the new one using a socket driver. The supplier notes that the threads are clean and well formed, but warns that the nozzle and block remain extremely hot during the change, so contact must be avoided to prevent burns.
Stainless steel resists wear from filled materials such as carbon-fibre or glow-in-the-dark filaments that would quickly erode a brass tip. The 0.3 mm orifice limits maximum layer height and flow rate compared with larger nozzles, and the fixed 13 mm overall length and M6 thread mean the part only fits hot ends designed to the MK8 specification.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
Recalibrate the distance between the nozzle and build plate as instructed, then run a test print to verify consistent extrusion and layer quality.
The box contains two stainless steel nozzles with M6 thread; a spanner and socket screwdriver are needed for removal and fitting but are not included.
It is designed for 1.75mm filament and fits MK8 hot ends with a 5mm thread length.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?