Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Set of five brass MK10 nozzles with 0.4 mm bore for 1.75 mm filament, M7 thread and 13 x 9 mm size
These 0.4 mm brass nozzles fit MK10 extruder heads and accept 1.75 mm filament. The pack contains five pieces, each stamped with its size for quick identification. They are suited for printing non-abrasive materials such as PLA, ABS and PCL. Threads are M7 with a 4 mm thread length.
Verify that your printer uses an MK10-style hot-end with an M7 thread before ordering. The nozzle input diameter is 4 mm and the filament path is sized for 1.75 mm stock. After installation you must recalibrate the nozzle-to-bed distance to restore print quality.
Replacement requires heating the hot-end to the filament's working temperature — 180–220 °C for PLA or 240–280 °C for ABS — then using a spanner to hold the heat block while unscrewing the old nozzle. The brass body conducts heat rapidly, so avoid contact with the hot block during the swap.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
Only the five nozzles are included; a spanner and socket screwdriver are needed for fitting but are not supplied.
The 0.4mm brass tip is the standard size for 1.75mm PLA, ABS and PCL, giving a good balance of detail and flow without the extra cost of hardened steel.
The nozzle-to-plate distance will be wrong, causing poor first-layer adhesion, uneven extrusion and failed prints until you re-level the bed.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?