Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two 0.5 mm brass nozzles with M6 threads for 1.75 mm filament on V6 hot-ends
Two brass nozzles with a 0.5 mm bore and M6 thread are made for V6 extruder heads that accept 1.75 mm filament. The 12 mm overall length and 7 mm thread length match the standard V6 form factor. They are suited for hobbyists and small workshops printing PLA, ABS, PCL and similar non-abrasive materials.
Verify that your printer uses a V6-style hot-end with an M6 thread and that the filament path is sized for 1.75 mm stock. The nozzle input diameter is 2 mm, so the heat-break and PTFE tube must align with that dimension. After installation you must recalibrate the nozzle-to-bed distance to restore first-layer quality.
Brass conducts heat quickly, so the nozzle reaches working temperatures of 180 to 220 for PLA or 240 to 280 for ABS and stabilises rapidly. The consistent bore and clean threads maintain steady extrusion over extended sessions without the wear seen with abrasive composites. Allow the hot-end to cool fully before removal to avoid burns.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The pack contains two brass nozzles. You will need a spanner to hold the heat block and a socket screwdriver to remove the old nozzle and install the new ones.
These nozzles have a 0.5 mm outlet, M6 thread, 7 mm thread length and 2 mm input bore, matching a V6 hot-end designed for 1.75 mm filament.
A 0.5 mm brass nozzle works with common filaments such as PLA and ABS; after fitting, recalibrate the nozzle-to-bed distance before printing.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?