Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of five 0.6 mm brass nozzles for MK10 printers using 1.75 mm filament
This pack contains five brass nozzles with a 0.6 mm aperture designed for MK10 hot-ends that accept 1.75 mm filament. Each nozzle is stamped with its size for quick identification and features clean M7 threads with a 4 mm thread length. The brass construction resists rust and erosion for extended service life. They suit hobbyists and workshops running standard non-abrasive filaments.
Brass conducts heat quickly, so the nozzle reaches target temperatures of 180 to 220 for PLA or 240 to 280 for ABS and maintains a stable melt zone during long prints. The consistent bore and smooth internal surface reduce friction, helping to prevent pressure build-up that can cause under-extrusion on extended runs. Recalibrating the nozzle-to-bed gap after each swap keeps first-layer adhesion reliable over many hours.
The M7 thread with 4 mm engagement fits MK10 heat blocks that share this exact specification; printers using different thread pitches or lengths will not accept these nozzles. The 0.6 mm bore balances flow rate and detail for common materials such as PLA, ABS and PCL, but abrasive composites will wear the brass quickly. Users needing finer or coarser extrusion must select a different diameter.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The nozzle itself generates no heat; it simply conducts heat from the hot-end. Brass transfers heat quickly, so the hot-end reaches printing temperatures of 180-220 for PLA or 240-280 for ABS efficiently.
You need a 3D printer with an MK10 hot-end that accepts M7 threads, a 4mm thread length, and a 1.75mm filament path. A spanner and socket screwdriver are also required for installation.
The nozzles have clean, well-formed M7 threads cut to a 4mm length. If the existing heat-block threads are damaged, the new nozzle may not seal properly and could leak filament.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?