We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains 0.8mm MK10 Stainless Steel Nozzle 1pcs

SKU CH-TS1T-J8NHC

Stainless-steel 0.8 mm nozzle fits MK10 extruders for 1.75 mm filament

  • 8 mm bore extrudes wider layers for faster prints
  • M7 thread fits MK10 extruders without adapters
  • Stainless steel resists wear from abrasive filaments
  • 75 mm filament channel matches standard spools
  • 13 mm length seats cleanly in standard heat blocks

Precision 0.8 mm MK10 nozzle

This stainless-steel nozzle fits MK10 extruders and accepts 1.75 mm filament. The M7 thread and 4 mm thread length match the hot-end specification, while the 0.8 mm orifice prints wider tracks for faster builds. Overall length is 13 mm with a 9 mm diameter. A single piece is supplied.

Users who need strong parts or high throughput

Makers printing PLA, ABS or PCL at standard temperatures will benefit from the larger bore and stainless-steel wear resistance. Builders who need fine detail, tiny text or intricate overhangs should choose a smaller-diameter nozzle instead. The part is not suited for printers that use a different thread pitch or filament size.

Critical spec: 0.8 mm nozzle diameter

This single dimension sets the minimum feature size and maximum volumetric flow rate for the hot-end. If your slicer profiles and design requirements call for a 0.8 mm opening, the nozzle is a direct fit; otherwise a different diameter is required.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 99% of the 5,852 comparable items (median $91.99).

New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameUnique Bargains

Questions about this item

Will this 0.8mm M7 thread nozzle screw straight onto the MK10 hotend I already have?

Yes, the M7 thread and 4mm thread length are made for the MK10 extruder head, so it fits directly without an adapter.

How can I confirm the 0.8mm stainless steel nozzle is printing correctly after I install it?

Heat the hotend to 180-220 for PLA or 240-280 for ABS, then watch for a steady, even extrusion line and recalibrate the nozzle-to-bed gap before the first print.

Does the package include any tools or extra seals, or just the single nozzle?

Only the 13 x 9 mm stainless steel nozzle is supplied; a spanner and socket screwdriver are needed for fitting and must be sourced separately.

More in Print & Scan Accessories

Similar items