Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Push-fit brass-and-plastic M5 fittings hold 4 mm OD PTFE tube for 1.75 mm filament, 19.5 mm tall with 0.8 mm thread pitch, pack of five
This pack contains five M5 push-to-fit connectors built from brass and plastic. Each fitting accepts a 4 mm outer-diameter PTFE tube for 1.75 mm filament. The thread pitch is 0.8 mm and total height measures 19.5 mm. They are designed to join an extruder and Bowden tube on compatible 3D printers.
Makers running a Bowden-style extruder with M5-threaded ports and 4 mm PTFE tubing will find these a direct match. Builders whose hot-ends use a different thread size, a larger tube diameter or a compression-style fitting should look at other connection types instead.
The decisive specification is the M5 × 0.8 thread combined with a 4 mm inner diameter at the blue collet end. Only printers that provide an M5 female port and run 4 mm OD PTFE for 1.75 mm filament can use these fittings without adapters.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
Start the M5 thread by hand until it seats flush, then tighten gently with a spanner; the 0.8 mm pitch engages quickly so stop as soon as resistance rises.
The brass body is durable, but the plastic collet and internal seal can wear from repeated tube insertion; inspect them when changing PTFE tubing and replace if the grip feels loose.
The 19.5 mm height leaves little room above the heater block; measure the gap between the block and any fan shroud or cable guide before ordering to ensure the fitting clears.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?