Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Set of five stainless-steel MK8 nozzles ranging from 0.2 mm to 1 mm for 1.75 mm filament
This set supplies five stainless-steel nozzles for MK8 hot-ends that accept 1.75 mm filament. The diameters cover .2, .3, .4, .5, .6, .8 and 1 mm, letting one printer switch between fine detail and high-flow jobs. Each nozzle is stamped with its size for quick identification. The M6 thread and 5 mm thread length match the standard MK8 heat-block interface.
Stainless steel withstands filled filaments such as carbon-fibre or glow composites that wear brass quickly. The smooth contact surface seats cleanly against the heat break, reducing leak paths. Clean M6 threads engage without cross-threading, so swaps take minutes with a spanner and socket driver. Overall length is 13 mm and outer diameter is 6 mm, fitting the stock heater block envelope.
Every nozzle carries its diameter on the flank, eliminating guesswork when reaching for the next print. The pack includes .2, .4, .6, .8 and 1 mm tips, covering the most common layer-height choices. After installation the supplier advises reheating to 180-220 for PLA or 240-280 for ABS, then recalibrating the nozzle-to-bed gap before printing.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The nozzles have a 5 mm M6 thread, so they only fit hot-ends with an M6 × 5 mm threaded heater block.
Each nozzle measures 13 mm long by 6 mm in diameter, requiring a heater block with a matching bore and clearance.
Heat to 180–220 °C for PLA or 240–280 °C for ABS, then keep the block hot while turning the nozzle to avoid seizing.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?