Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
PTFE tube with 2 mm inner and 4 mm outer diameter guides 1.75 mm filament from extruder to hotend in a smooth arc
The white PTFE tube measures 1.5 metres (4.92 feet) with a 2 mm inner diameter and 4 mm outer diameter. It is manufactured to tight tolerances so 1.75 mm filament feeds smoothly from the extruder to the hotend. The material is slippery and rigid enough to hold a gentle arc without kinking during normal printer operation.
Over time original bowden tubes develop internal ridges or ovality that increase friction and cause under-extrusion. Swapping to a fresh length restores consistent filament flow and reduces the frequency of nozzle clogs. The upgrade is worthwhile when retraction settings can no longer compensate for the degraded tube surface.
PTFE resists heat creep and chemical attack from common filaments, so the inner surface stays smooth over extended sessions. The tube holds its shape under the continuous push-pull of retraction cycles, preventing the gradual binding that soft or undersized tubing develops. It remains dimensionally stable across the temperature range used by typical 1.75 mm 3D printers.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The tube has a 2 mm inner diameter and a 4 mm outer diameter, sized for 1.75 mm filament.
Cut the tube square, push it fully into the pneumatic couplers on both ends, and secure the locking clips so the tube cannot retract under pressure.
Replace it when the inner surface shows wear, discolouration, or when filament starts to catch during extrusion.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?