Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
DC 24 V fan cools 3D printer extruder heatsinks with 22 mm cover, 25 mm mounting pitch and 305 mm cable
This DC 24V fan measures 30 x 30 x 32mm and is designed to press directly onto a heatsink with a 22mm cover diameter. It suits 3D printer extruder cooling on machines such as RepRap, Rostock, Prusa Mendel and Huxley. Builders needing a different voltage or a larger frame will need another solution.
The fan runs continuously at its rated 24V to move air across the hotend heatsink during long prints. Its 305mm cable reaches most controller boards without extension. No airflow or static-pressure figures are supplied, so comparative performance under load cannot be stated.
Installation uses a 25 x 25mm mounting pitch with 3mm holes and a 2-pin 2.54mm pitch connector. The press-fit design relies on friction against the heatsink, so a loose fit can cause vibration or detachment. Users without a 24V supply or a matching 2-pin header cannot connect it directly.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The 30 x 30 x 32 mm frame moves air directly over the 22 mm heatsink cover, keeping the hotend cool during long prints without a bulky housing.
You need a 24 V DC fan header or wiring point on your printer board and two 3 mm holes spaced 25 x 25 mm apart on the heatsink.
The 305 mm lead is long enough for most classic RepRap, Rostock, Prusa Mendel and Huxley layouts, pressing straight onto the heatsink.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?