UOTEK UT-277SM RS232 RS485 RS422 Fiber Modem 460kbps 20km
Converts RS-232, RS-485 and RS-422 signals to single-mode fibre for 20 km links at up to 460 kbps
- Interface typeOptional SC, FC, ST
- Cable interfaceTerminal block
- Maximum transmission rateTransmission rate: 460 kbit/s
- Product typeFiber Optic MODEM
- Connects serial devices over 20 km single-mode fiber
- Converts RS-232, RS-485 and RS-422 to optical signals
- Supports 460 kbps on RS-485/422 and 115.2 kbps on RS-232
- Mixed-port flexibility links different serial standards directly
- Master-slave mode enables reliable half-duplex RS-485 control
Industrial serial-to-fibre bridge
The UT-277SM converts asynchronous RS-232, RS-485 and RS-422 signals for transmission over single-mode fibre up to 20 km. It is built for engineers linking remote terminal units or SCADA controllers across sites where copper runs are impractical. The pair of modems enables full-duplex or half-duplex operation with mixed electrical interfaces on each end.
Low-draw passive cooling
The unit runs without fans and draws minimal power from the supplied US or EU mains adapter, so it adds no audible noise to cabinets or DIN-rail enclosures. Typical surface temperature stays close to ambient during continuous 460 kbps RS-485/422 traffic. No external heatsink or forced airflow is required for normal indoor deployments.
Two modems create the link
A single UT-277SM cannot operate alone; the kit includes two matched units so the optical path is ready immediately. Terminal-block wiring lets you mix RS-232 at 115.2 kbps with RS-485 or RS-422 at 460 kbps on either side without extra converters. Master-slave mode and automatic TXD control on the RS-485 port simplify integration with legacy polling software.
How it compares
Measured against everything we stock in Cable Modems & Gateway Routers, at today’s prices. Recalculated every night.
- Price $85.99
- Cheaper than about 63% of the 122 comparable items (median $120.99).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | UOTE |
| Model name | UT-277SM |
| Product type | Fiber Optic MODEM |
| Ports & slots | |
| Interface type | Optional SC, FC, ST |
| Cable interface | Terminal block |
| More details | |
| Maximum transmission rate | Transmission rate: 460 kbit/s |
Questions about this item
How do I connect the terminal block for RS-485 and which wiring step is often missed?
Wire the terminal block for two-wire half-duplex RS-485 or four-wire full-duplex RS-422, then enable the TXD control jumper so the modem drives the line only during transmission — skipping this jumper causes bus contention.
Which consumable part will need replacement first in a 20 km single-mode link?
The SC, ST or FC single-mode fiber patch cord and its connector ferrules are the only field-replaceable items; the modem itself has no user-serviceable parts.
At what sustained data rate does the RS-232 port become the bottleneck?
The RS-232 port tops out at 115.2 Kbps, so any continuous stream above that rate will be limited by the port rather than the 460 Kbps fiber link.
More in Cable Modems & Gateway Routers
Similar items
Motorola MG7550-10 16x4 DOCSIS 3.0 Cable Modem AC1900 WiFi Router
- Ethernet Port
- DOCSIS 3.0
Netgear Nighthawk CM3000-100NAS DOCSIS 3.1 2.5Gbps Cable Modem
- 1 × 2.5 Gbit/s + 2…
- DOCSIS 3.1
NAKAMICHI N300 4G LTE Modem Router 300Mbps WiFi 150Mbps LTE Cat4
- Modem Router Combo
Netgear Inc. CAX30S-100NAS Nighthawk AX2700 DOCSIS 3.1 Cable Modem Router
- CATV-Coaxial connec…
- Cable Modem
UOTEK 2577SM RS232 RS485 RS422 Single-Mode Fiber Modem Pair
- Gateway Modem





