Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects USB 3.0 printers, scanners or hubs to a PC at up to 5Gbps with over-molded A-to-B connectors
This three-foot cable links USB 3.0 printers, scanners or hubs to a compatible PC or laptop. It carries a USB 3.2 Gen 1 Type-A plug on one end and a Type-B plug on the other. The moulded connector shells reinforce the joint between cable and plug. No driver installation is required for operation.
The cable supports the full 5 Gbps signalling rate defined by the USB 3.2 Gen 1 specification. When connected to older ports it falls back to USB 2.0 or 1.1 speeds automatically. Bandwidth is sufficient for typical document printing, scanning and hub traffic. Very large bulk transfers will saturate the link and run at the 5 Gbps ceiling.
The assembly is qualified for a 30 V working voltage and an 80 °C ambient temperature range. Over-moulded connectors reduce strain during repeated insertion cycles. Power draw follows the USB 3.2 Gen 1 bus-power limits for the attached device. The cable adds no active cooling or noise of its own.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Model name | USB3.0-ABM-3 ft |
| Product color | Black |
| Ports & slots | |
| Connection type | USB A to USB B |
| Size & build | |
| Cable length | 4 ft (1.22 m) |
| Overall length | 3 ft (0.91 m) |
The cable is backward compatible with USB 2.0 and 1.1 devices, so it will work but the transfer rate will be limited to the printer's USB 2.0 capability.
Connect a USB 3.0 device such as a scanner or hub, then check the operating system's device manager or system report to verify the link is enumerated as USB 3.0 or SuperSpeed.
The box contains only the 3 ft USB A Male to B Male cable with over-molded connectors; no adapters, driver discs or additional accessories are included.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?