Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 28-inch white USB 2.0 A-to-A extension cable supporting 480 Mbit/s data rates with 24-gauge power wires and moulded strain relief
This USB 2.0 Hi-Speed extension cable carries a USB Type A male connector on one end and a Type A female port on the other. It extends the flat A connection of an existing cable by 28 inches so printers, scanners, modems or digital cameras can sit further from the host. The white PVC jacket is soft and flexible for easy routing. It is sold new and meets the USB 2.0 specification.
The conductors are rated for 480 Mbits/sec transmission speed and use 24-gauge power wires to maintain voltage over the full length. Cable marking AWM 2725 shows an 80 °C temperature rating and 30 V voltage rating, so the assembly handles continuous hi-speed signalling without degradation. The USB standard permits daisy-chaining up to 127 devices, and the cable supports that topology.
Passive copper construction adds no active cooling and produces no audible noise. The 24 AWG power pair limits resistive loss, keeping the 5 V supply within specification for typical peripherals. Molded strain relief and PVC over-moulding protect the solder joints from flex fatigue, supporting a long service life. Total bus length must remain within the 5 metre (16.5 ft) limit defined by USB 2.0.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | USBGear |
| Model name | USBG-06AAW |
| Product color | White |
| Ports & slots | |
| Connection type | USB A to USB A |
| Size & build | |
| Overall length | 28 in (71.1 cm) |
The cable is passive and carries up to 480 Mbits/sec without active components, so it adds no measurable heat or power draw during all-day use.
You need a standard USB Type-A port on the host and a USB Type-A plug on the device you want to extend; the cable provides a Type-A female receptacle to bridge them.
Yes — the cable complies with USB 2.0 specifications and is backward compatible, so legacy USB 1.1 devices operate at their native speed through the 28-inch link.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?