Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 9-foot USB 2.0 A-to-A extension cable with foil-and-braid shielding and molded strain relief for 480 Mbit/s data transfer
The USBGear USBG-AA9CC is a nine-foot USB 2.0 A-to-A extension cable in a smoke-coloured jacket. It adds length to the flat Type A end of an existing cable so that printers, scanners, modems, cameras or similar peripherals can sit further from the host computer. Foil-and-braid shielding plus 24-gauge power conductors and 28-gauge data pairs are designed to preserve signal integrity at the full 480 Mbits per second rate. Molded strain relief and PVC over-moulding protect the terminations from repeated flexing.
The cable suits anyone who needs to bridge a gap of up to nine feet between a standard USB A port and a USB A device without introducing a hub. It is not for connections that require USB 3.0 or higher throughput, nor for linking two host controllers directly. Builders who need a longer single run than the USB 2.0 specification allows should look at active repeater or fibre solutions instead.
Shielding and the specified wire gauges aim to keep error rates low during continuous bulk-endpoint transfers such as long print jobs or scanner sweeps. The USB 2.0 standard caps a passive cable at about 16.5 feet, so this nine-foot length stays within the passive limit and avoids the signal degradation that longer unamplified runs can exhibit. Temperature rating of 80 °C and VW-1 flammability compliance indicate the materials tolerate warm operating environments without softening.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | USBGear |
| Model name | USBG-AA9CC |
| Product color | Smoke |
| Ports & slots | |
| Connection type | USB A to USB A |
| Size & build | |
| Overall length | 9 ft (2.74 m) |
The cable extends a standard USB Type A connection, so the host or hub needs a Type A port to accept the male plug.
Yes, the USB 2.0 specification is backward compatible, so a USB 1.1 printer will operate at its native speed when connected through the extension.
Connect a USB 2.0 device and verify the host reports a high-speed connection, then run a file transfer to see throughput approaching the rated rate.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?