VCOM International Ltd NC614-1000-BLACK 1000ft Cat6 UTP cable (Black)
Supplies 1000 ft of Cat6 UTP cable for structured wiring, verified to UL, ETL and EMC standards with 100 ohm impedance up to 250 MHz
- 1000 ft length covers large installations without joins
- Cat6 UTP rated to 250 MHz for gigabit speeds
- Black jacket simplifies cable identification in dense racks
- UL / ETL / EMC verified for safety compliance
- Tensile strength 93 N / 25 lbs resists pulling damage
1000ft Cat6 UTP cable
This 1000-foot Category 6 unshielded twisted-pair cable supplies bulk networking wire for installers running structured cabling in commercial or residential buildings. The black jacket simplifies identification in dense patch panels or conduit runs. It is sold new in a single continuous length.
250 MHz bandwidth and 100 Ω impedance
The cable is verified to 250 MHz with a characteristic impedance of 100 Ω ± 15 %, limiting usable frequency to that range. Propagation delay reaches 536 ns per 100 metres at the top frequency and delay skew is capped at 25 ns maximum. Mutual capacitance measures 5.6 nF per 100 metres at 1 kHz.
25 lb tensile limit and 6.65 Ω/km resistance
Maximum pulling tension is 25 lbs (11.35 kg) and DC resistance reaches 6.65 Ω per kilometre, so runs approaching the full 1000 ft must stay within those electrical and mechanical limits. The bending radius equals four times the cable diameter. Buyers needing shielded construction or higher frequency ratings should select a different cable type.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $111.99
- Pricier than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What length of this Cat6 UTP cable should I choose?
The reel supplied is 1000 ft of black Cat6 UTP cable; order the length your installation requires.
What does the 250 MHz rating mean once the cable is installed?
Characteristic impedance is 100 ohm ±15 % from 1 MHz to 250 MHz, with transport delay up to 536 ns per 100 m and delay skew of 25 ns maximum.
Which standard does the cable meet and what does it cap in practice?
UL / ETL / EMC verified Cat6 UTP; maximum DC resistance 6.65 ohms per km, mutual capacitance 5.6 nF max per 100 m, NVP 65 % to 70 %.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister internal power cable 1 3 21 364 9404 435506 435508 436431
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





