VEVOR ALK-T8 Fiber Fusion Splicer 6 Motors 5" Touch Screen 7800mAh Battery
A core-alignment fiber fusion splicer with six motors, 6-second splicing, 13-second heating, a 5-inch touch screen and a 7800 mAh battery
- Product typeOther Appliances
- 6-second splicing with 0.01 dB loss via 6-motor core alignment
- 5-inch touch screen shows 320x single-axis or 200x dual-axis views
- 7800 mAh battery supports extended field splicing sessions
- 3-in-1 fiber holder handles SM, MM, DS, NZDS, pigtail and patch cables
- Built-in VFL and OPM measure loss and verify continuity
Core-alignment splicing with six motors
This fusion splicer uses six high-precision motors to perform core and cladding alignment on single-mode, multimode, DS and NZDS fibers. It is built for field technicians and contractors who need reliable joint preparation and low-loss fusion in telecom, datacom or enterprise installations. The kit includes a cleaver, stripper, miller pliers, cleaning supplies and a portable case for complete on-site readiness.
7800 mAh battery and 3-in-1 holder capacity
The 7800 mAh battery supports extended outdoor sessions without mains power, while the 3-in-1 holder accommodates bare fiber, pigtails and patch cables up to 3 mm. Splicing completes in 9 seconds fast mode or 13 seconds standard mode, with heating also at 13 seconds. Fusion loss reaches as low as 0.01 dB for multimode fiber, though very high fiber-count ribbon work or angled-polish connectors fall outside the holder design.
5-inch touch screen and 11.8 lb field weight
A 5-inch color touch screen provides independent 320x X or Y views or simultaneous 200x X and Y monitoring for clear core visibility during alignment. The unit weighs 11.8 lb and measures 7.9 x 5.7 x 5 inches, so it remains portable in its case but is not a lightweight handheld tool. Built-in VFL and OPM functions add link verification without extra instruments, and the cooling tray protects the heater between cycles.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $611.99
- Pricier than about 87% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Other Appliances |
Questions about this item
Will the ALK-T8's 3-in-1 fiber holder work with the bare fiber and patch cables I already use?
Yes, the 3-in-1 holder accepts SM, MM, DS, NZDS, pigtail, bare fiber and patch cable without extra adapters.
How can I confirm the splicer is performing within the 0.01 dB loss spec after setup?
Run a test splice on the 5-inch touch screen; the real-time X/Y 200x view and built-in OPM let you verify loss readings immediately.
Do I need to buy a cleaver, stripper or heat-shrink tubes separately, or are they included?
The box includes a fiber cleaver, stripper, 3-hole Miller pliers, 100 heat-shrink tubes, 2 spare electrodes plus cleaning tools and a portable case.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH QSFP40GSR4ST 40GBASE-SR4 SFP transceiver
- Transceiver
- IEEE 802.3ba 40GBAS…
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
AddOn QSFP-40G-SR4-S-AO SFP transceiver 40GBase-SR4
- Cisco
- Transceiver
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Lantronix S6010-1040-SA T1/E1 SFP transceiver 1.50 km
- Lantronix
- Converter





