Vibob Store ATX 24-pin L-angle adapter internal power cable
Right-angle ATX 24-pin adapter reroutes the power cable from vertical to horizontal, fitting low-profile chassis in a 52 x 18 x 33 mm footprint
- Product colorBlack
- Changes ATX 24-pin cable routing from vertical to horizontal
- Fits tight chassis with 52 x 18 x 33 mm adapter size
- Black EVA foam design protects connectors during installation
- Blue PCB provides clear visual identification inside the case
- Female-to-male 24-pin configuration enables direct PSU connection
Right-angle ATX 24-pin adapter for tight builds
This adapter re-routes a standard 24-pin motherboard power connector from vertical to horizontal orientation. It targets system builders working in low-profile or space-constrained chassis where a straight cable would foul the side panel or other components. The compact PCB lets the cable run flat along the board instead of projecting upward.
52 x 18 x 33 mm footprint clears low ceilings
The adapter measures 52 mm long, 18 mm wide and 33 mm high, so it fits between the motherboard and a restrictive case roof. Its right-angle design swaps the cable exit by ninety degrees without adding bulk. Builders who need the connector to point the other way or who have ample vertical clearance will not benefit from this part.
Blue PCB with black EVA foam spacer
The board ships in blue with a black EVA foam pad on the rear that cushions the connector against the motherboard and prevents shorting against metal standoffs. No extra cables, screws or software are included. Users requiring a straight-through extender or a different pin count must source a separate product.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
How does the L-angle adapter change the 24-pin cable routing in a tight chassis?
It reorients the ATX 24-pin connector from vertical to horizontal, letting the cable run flat against the motherboard so it fits inside low-clearance cases.
What connector standard does this adapter use and what current limit applies?
It uses the standard ATX 24-pin interface; the current limit is whatever the power supply and motherboard headers are rated for, as the adapter adds no active circuitry.
What clearance is needed to fit the 52 by 18 by 33 millimetre adapter body?
You need at least 52 millimetres length, 18 millimetres width and 33 millimetres height of free space around the motherboard's 24-pin socket.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





