Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one VGA source to two displays at 1920×1440 60 Hz with 250 MHz bandwidth and 30 m reach, supporting three daisy-chained units
This 1×2 VGA splitter duplicates one VGA source to two monitors, supporting resolutions up to 1920×1440 at 60 Hz with 250 MHz video bandwidth. It is aimed at digital signage in schools, retail displays, trade shows and public broadcast systems where the same image must appear on several screens.
The unit connects via standard 15-pin VGA ports and requires no software drivers; simply link the source to the input and two displays to the outputs. An integrated booster extends the signal up to 30 metres, and up to three units can be daisy-chained for larger installations. Only the first output passes DDC, DDC2 and DDC2B data, so secondary monitors may not report EDID information correctly.
Verify that your source device can output 1920×1440 at 60 Hz or a lower supported mode such as VGA, XGA, SVGA, UXGA or WUXGA. Ensure the total cable run from source to the farthest display does not exceed 30 metres, and note that only the first output supports DDC communication for automatic display detection.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Connect each display to the two VGA 15HDF outputs, set the source to 1920×1440@60Hz, and verify both screens show a stable image without flicker or signal loss at that resolution and refresh rate.
The splitter itself is supplied; you must provide three VGA 15HDF cables — one from the source to the input and two from the outputs to the displays — rated for the required 30 m distance.
One unit drives two monitors; linking three units in a daisy-chain expands the installation to six displays while keeping the 250 MHz bandwidth and 1920×1440@60Hz specification on each output.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?