Vszerda 12V 4Pin RGB LED Splitter 1 to 10 with 50CM Extension Cable
Splits one 12 V 4-pin RGB header into ten ports for 5050 and 3528 strips, includes 50 cm extension cable
- Splits one motherboard RGB header into ten device ports
- Supports 12 V input and up to 6 A total current
- Works with 5050 and 3528 RGB LED strips
- Includes 50 cm 4-pin extension cable for flexible routing
- Double-sided adhesive and acrylic case keep the hub securely mounted
12V 4-Pin RGB Splitter Hub
This Vszerda hub expands a single motherboard 12V 4-pin RGB header into ten female ports. It is built for PC builders who want to run multiple 5050 or 3528 LED strips from one control point. The hub includes a 50 cm extension cable and adhesive backing for secure chassis mounting.
Upgrade from limited RGB headers
Most motherboards provide only one or two 12V RGB connectors, which restricts lighting zones. This splitter makes the jump worthwhile when you need to synchronise ten strips or fans without adding a separate controller. It supports constant, breathing and monochromatic cycle modes only.
Tool-free installation with arrow alignment
No soldering is required; simply match the arrows on each plug to the hub and motherboard header. The acrylic case and double-sided tape hold the board firmly in place. Ensure your motherboard uses a 12V 4-pin RGB header, not a 5V 3-pin addressable header, or the devices will not function.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I mount the splitter hub inside my chassis?
The hub has adhesive tape on the back and an acrylic protective case, allowing it to be fixed directly to a flat surface inside the case.
What is the correct way to connect the 4-pin plugs to avoid damage?
Align the arrows on each plug with the corresponding marks on the hub headers before pushing them in fully; no soldering is required.
What ongoing maintenance does the splitter and extension cable require?
No scheduled maintenance is needed; simply check connections if lighting effects become unstable and replace the cable only if physical damage occurs.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





