Vszerda 12VHPWR 12+4 Pin 90° Power Bridge White
A 12+4 pin 90-degree power bridge with a 23 mm low profile for PCIe 5.0 graphics cards up to 450 W
- 90° angled connector clears 23 mm for side-panel fit
- Strengthened PCB avoids wire bending and keeps full terminal contact
- Rated 450 W maximum to prevent overheating
- Low-profile design suits compact chassis and large GPUs
- PCIe 5.0 12+4 pin standard supports 4090, 4080, 4070
12VHPWR 12+4 Pin 90° Power Bridge
The Vszerda PCIe 5.0 12VHPWR GPU Power Bridge is a white angled adapter that connects a 12+4 pin cable to compatible graphics cards. Its strengthened PCB design allows a 90-degree turn without bending wires, preserving full terminal contact and reducing thermal risk from tight bends.
For compact chassis with limited side-panel
The low-profile adapter extends only 23 mm from the card, helping builders close side panels in tight cases. It is rated for a maximum of 450 W, so systems drawing more power should not use this bridge. Buyers must verify at least 23 mm of space between the GPU and the panel before installing.
Maximum 450 W power rating
The single specification that determines suitability is the 450 W limit. If the graphics card or power supply configuration exceeds this threshold, the adapter can overheat and cause damage. Confirm the total power draw stays within 450 W before purchasing.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What power supply cable must I already have to connect this 12+4 pin bridge?
You need a standard 12VHPWR cable from an ATX 3.0 or PCIe 5.0 power supply to plug into the bridge.
Will the 90° white adapter fit a 4080 that I am keeping?
The bridge is listed as compatible with the 4080 and its 90° angle adds 23 mm of clearance toward the side panel.
How can I confirm the bridge is seated correctly after installation?
The strengthened PCB should sit flush at the 90° angle with no wire bending and all 12+4 pins fully engaged in the GPU socket.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister PS5 NVME M.2 SSD Heatsink Thickening Cooling Metal Sheet Thermal Pad internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





