Vszerda 12VHPWR 16 Pin to 4X 8 Pin 600W GPU Power Connector Type B internal power cable
Converts four 8-pin PCIe connectors into a 12VHPWR 16-pin plug delivering up to 600W with a 180-degree Type B design for RTX 4090, 4080 and 3090Ti cards
- Delivers up to 600W for high-performance GPUs via four 8-pin PCIe connectors
- 180-degree adapter angle eases cable routing and reduces strain on the GPU power socket
- Type B layout with four pins facing outwards matches specific RTX 4090 and 4080 board designs
- Compatible with ASUS Strix and TUF models plus NVIDIA Founders Edition backplate-side connectors
- Works with Alphacool Eisblock Aurora water-block backplates on RTX 4090 Strix and TUF cards
12VHPWR 16-pin adapter for RTX 40-series
This internal power cable converts four 8-pin PCIe connectors into a single 12VHPWR 16-pin plug rated for 600 W. It is built for builders fitting an RTX 4090, 4080 or 4070 Ti graphics card into a system with an ATX 3.0 power supply that lacks the native connector.
Type B orientation with 180-degree bend
The 180-degree angle routes the cable parallel to the card, easing routing in tight cases and lowering mechanical stress on the GPU socket. Type B pin-out places the four sense pins facing outwards, matching the connector layout used on ASUS Strix and TUF models as well as NVIDIA Founders Edition backplate-side sockets.
3 mm backplate clearance limit
The adapter only fits when the GPU backplate extends no more than 3 mm beyond the power socket. Cards with thicker backplates or water-blocks that protrude further will prevent the 16-pin plug from seating fully, risking poor contact and overheating.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 58% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 12VHPWR 16-pin connector need periodic reseating to avoid the overheating risk mentioned in the note?
The note warns that an unseated connector causes overheating, so checking the 16-pin is fully inserted during any build maintenance is the only required step.
What stops the 600 W rating from being sustained through the four 8-pin PCIe inputs?
The adapter is rated for 600 W total; the first limit under sustained load is the combined capacity of the four 8-pin sources feeding it.
Does the 180-degree Type B adapter run hotter or draw more power than a straight cable when the GPU runs all day?
The 180-degree bend only changes routing; it adds no resistance or heat, so power draw and temperature stay identical to a straight 12VHPWR cable.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 10pcs IDE 4Pin to SATA 15p Y Splitter 10cm internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





