Vszerda 12VHPWR 90° 16AWG 2x8-Pin to 16-Pin PCIe 5.0 Adapter Type A 15cm
A 15 cm 12VHPWR 90 degree adapter connecting two 8 pin PCIe plugs to a 16 pin 12+4 pin GPU connector for RTX 3090 Ti 4070 Ti 4080 4090 cards, rated 600 W using 16 AWG wire and PCIe 5.0
- 90° right-angle connector fits tight GPU clearances
- 12VHPWR PCIe 5.0 standard delivers up to 600W
- 16AWG tinned copper wires ensure stable high-current flow
- Type A orientation matches specific RTX 40-series card layouts
- 15cm length keeps cable routing clean and short
12VHPWR 90° Type A Adapter
This 12VHPWR adapter converts two 8-pin PCIe power connectors into a single 16-pin 12+4 connector with a 90-degree right-angle orientation. It is built for RTX 3090 Ti, 4070 Ti, 4080 and 4090 graphics cards that require the PCIe 5.0 power standard. The Type A orientation must match the specific GPU socket layout before installation.
16AWG 600W Cable Construction
The cable uses 16AWG tinned copper wire rated for up to 600W delivery, with alloy copper terminals for stable current transfer. A 15cm length keeps cable routing short inside the chassis. The package includes only the adapter itself; no additional cables, combs or software are supplied.
Suitable For Single-GPU Builds
This adapter suits builders connecting a compatible 12VHPWR graphics card to a power supply with two free 8-pin PCIe ports. It will not work if fewer than two 8-pin connectors are available. Buyers needing a straight connector, a different orientation type, or a longer cable run should look elsewhere.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 61% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 16AWG wires or 12VHPWR connector need replacement after extended use?
The 16AWG tinned copper wires and alloy copper terminals are built for the adapter's full service life; no scheduled replacement is required under normal operation.
What limits sustained output before the adapter becomes a bottleneck?
The cable is rated for 600W maximum output, so sustained loads above that level would exceed the 12VHPWR 5.0 specification.
Does the 90-degree Type A connector run hotter or draw more power than a straight plug during all-day gaming?
The right-angle design does not increase resistance or heat; power draw and temperature remain identical to a straight 12VHPWR connection at the same load.
More in Internal PSU & Riser Cables
Similar items
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
ASRock CB-12V2X6L600W 12V-2x6 600W internal power cable
- 2.3 ft (0.7m)
- PCIe





