Vszerda 12VHPWR to four 8-pin 90-degree internal power cable
Converts four 8-pin PSU cables into a single 12VHPWR connector with a 90-degree angled head for RTX 3090 Ti, 4070 Ti, 4080 and 4090 graphics cards, supporting up to 600 W
- 90-degree angled connector fits tight GPU clearance
- Converts four 8-pin cables into one 12VHPWR plug
- Supports up to 600W for PCIe 5.0 graphics cards
- Compatible with RTX 3090 Ti 4070 Ti 4080 4090
- Single-cable design simplifies routing and improves case tidiness
Angled 90-degree 12VHPWR adapter
This Vszerda adapter converts four 8-pin power connectors into a single 12VHPWR plug for modern graphics cards. The 90-degree down-angled design eases installation where clearance around the GPU power port is tight. It supports the PCIe 5.0 and ATX 3.0 standards with a 12+4 pin configuration. One cable reduces clutter and simplifies cable routing inside the case.
Builders with limited GPU clearance
Suits builders who need to connect a 12+4 pin graphics card to a power supply that only provides 8-pin PCIe outputs. The right-angle plug helps when the card sits close to a side panel or drive cage. Not suitable for the older 12-pin connector found on the RTX 3090 series. Buyers whose PSU already has a native 12VHPWR output do not need this adapter.
600 W power delivery rating
The cable is rated for up to 600 W through the PCI-SIG 12VHPWR H+ interface, matching the requirement for high-end GPUs such as the RTX 4080 and 4090. Four 8-pin connectors on the supply side provide the necessary current. Verify that your power supply can deliver the required wattage across those four 8-pin ports before installing.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 64% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What connectors are included and do I need extra cables?
The cable has a single 16-pin 12VHPWR end and four 8-pin PCIe plugs. You supply four 8-pin cables from your modular PSU; nothing else is required.
Which version suits an RTX 4090 versus an older RTX 3090?
The adapter fits 12+4-pin cards such as RTX 3090 Ti, 4070 Ti, 4080 and 4090. It will not work with the 12-pin RTX 3090 series.
What does the 600 W rating mean once the cable is installed?
The PCI-SIG 12VHPWR H+ spec allows up to 600 W through the 12 power pins plus 4 signal pins, so a single cable can deliver the full rated power to a compatible GPU.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister Internal Power Cable 3.5 mm Aux Toslink Coaxial Bluetooth
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





