Vszerda 15Pin SATA to 6 Pin PCI-Express Video Card Power Adapter Cable 20cm 2 Pack
Converts a 15-pin SATA power connector to a 6-pin PCI-Express plug for graphics cards, 20 cm length, pack of two
- Powers a PCIe video card from a SATA connector
- 15 pin SATA to 6 pin PCIe adapter included
- 20 cm cable length keeps routing tidy
- Reduces strain on motherboard and drive connectors
- Two cables supplied for multi-card setups
SATA-to-PCIe Power Adapter for Video Cards
This 15-pin SATA to 6-pin PCI-Express adapter cable lets you power a video card using existing SATA power connectors inside your computer. It is designed for builders who lack enough native PCIe power connectors to run their graphics card. The 20cm length provides a direct link between the power supply and the component. Two cables are included in the pack.
Replaces Missing Native PCIe Connectors
The adapter eliminates the need to upgrade your existing power supply when it lacks sufficient 6-pin PCIe outputs for a new video card. It bridges the gap by converting spare SATA power leads into the required PCIe format. The jump is worth it when your power supply has adequate wattage and spare SATA connectors but missing the specific PCIe plugs. It also reduces physical strain on hard-to-reach internal connectors during installation.
Limited by SATA Connector Current Rating
The practical limit of this interface is the current capacity of the SATA power connector, which is lower than a native PCIe 6-pin connector rated for higher amperage. Drawing excessive power through the adapter can overload the SATA pins or the power supply's SATA rail. It is not suitable for high-power graphics cards that demand more current than the SATA specification safely delivers. Buyers who need to power high-wattage GPUs should not use this adapter.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does the 20 cm cable need behind the graphics card?
The adapter is 20 cm long, so allow roughly that depth behind the 6-pin PCI-Express connector for a gentle bend without stressing the port.
Which connector do I attach first when installing the SATA 15-pin to 6-pin adapter?
Plug the 15-pin SATA end into the power supply cable first, then connect the 6-pin side to the video card to avoid bending the shorter adapter under tension.
When should I replace the two adapter cables in the pack?
Replace a cable if the SATA 15-pin or 6-pin connector feels loose, shows discoloured pins, or the insulation becomes brittle from heat cycles.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister DB44 to 4x DB9 RS-422/485 internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister PS5 NVME M.2 SSD Heatsink Thickening Cooling Metal Sheet Thermal Pad internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





